APRILIA SPORTCITY CUBE 125 ENGINE OIL CHANGE
Loading...
786
views
Loading...
Uploader Comments (Riccardo30804)
see all
All Comments (7)
-
The factory puts the dang oil bolt and hub oil bolt on so tight you can barely loosen them the first time. Same with the filter. If you put a little oil UNDER the gasket as well as on the outside, then hand tighten it, you will never get a leak, plus it will be easy to remove next time. I use NEW oil to do this, plus put some new oil inside the filter so it will prime more quickly.
-
why is that oil so black?
-
tutto ben fatto, ti faccio soltanto qualche appunto:
-martellare il cricchetto all'inizio è assolutamnete da non fare, sia il cricchetto che la bussola e il dado della coppa non sopportano sforzi impulsivi;
- l'olio consigliato dalla casa è un 5w40, non 10w40 che tra l'altro non è neanche sintetico.
IMHO
Loading...
J agree that it is right for a perfect work to smear the gasket with new oil and put some oil inside the new filter. However the oil light switch off quickly the same ( after 3-4 seconds). J found the torque settings in a Haynes manual and j had no problems, never leaks and never bolts loosen.
Riccardo30804 3 months ago
It is regular, after some kilometers(2-3000) the oil become black but it lubricate the same
Riccardo30804 3 months ago
Ho dato martellate leggere con un martello di gomma, il motore era stato scaldato con 5-6 minuti in strada ma il tappo di scarico era ancora duro, e comunque questa cosa mi è stata insegnata da uno che lavora in una concessionaria d'auto.E poi sul mio libretto è consigliato il 10w40. Il mio scity cube è del 2008, forse tu hai una versione più vecchia. Dove abito io (Venezia) un 10w40(ELF semisintetico) che mantiene le sue caratteristiche da -20 a +40 è più che sufficiente. Grazie dei consigli.
Riccardo30804 5 months ago