Car Tie-Down w Axle Straps and Ratchet - etrailer.com

http://www.etrailer.com/tv-demo_erikson_car_tie_down_78433.aspx

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
This is a ratchet strap with dimensions of 2 inches by 8 feet long and is rated for 5,000 pounds. This is intended for a car tie down with a built in axle strap. We'll show you how it works and how it actually attaches to your vehicle. We'll begin with the actual axle strap itself. It has an extra layer her for cushioning so if you have a show car and you have a detailed under body it won't scratch up your paint finish. It simply wraps around the axle or cross member and snaps over itself like so. The rest of the strap which we have coiled up here, again you have 8 foot length, will go to your actual ratchet. To use this your ratchet end will get tied down to the end of the trailer, your strap will go through the slot here and it just pulls on through. Leave excess undone like that, then take your handle here, pull this lever back, and you ratchet it tight.
Now we're going to demonstrate this product, as you can see the padding goes around the axle itself and goes back around itself with this tie loop here. You also vary the loop here as you need it. Now we run it to our ratchet right here, and put the excess through the slot here and pull out the excess length. Take your ratchet and lock it with that lever here, and there you have it. Four more of those and your cars properly secured. There you have it for part # 78433 from Erikson Manufacturing.

Category:

Autos & Vehicles

Tags:

• ratchet
• strap
• car
• axle
• tie
• down
• trailer
• tow
• towing
• etrailer.com