Triumph TR6 Head Work
Loading...
Loading...
12,301
Link to this comment:
Share to:
Uploader Comments (mctim64)
see all
All Comments (8)
-
Hey, awesome work would you consider doing same same to my tr6 head? I've been to many different machine shop but none will work with british car heads...i don't see any difference between working on a 350 heads or a TR6 head but all the same if you would consider it, it would be a huge help!
-
This is the head that came off the car, I did the same work to the one that is on it now with the SC. This will be a spare.
-
Was this after or before the supercharger was installed
-
Ahhhh...I feel like I'm at the dentist office! But he's a great machinist.
Loading...
- 2:33Triumph TR6 Videoby carcrazy5129,478 views
Featured Video
- 1:21Carlsberg don't do car shows...by ppcmagazine145,067 views
- 1:37Does this engine sound OK ?by DaleTBanks7,579 views
- 1:14tr6 v8- 0-90 5 seconds less than 1/8 mileby tomsbad61,507 views
- 2:43Hilarious Commerial!!by slim2open27,486,971 views
- 2:54Triumph TR6 - GoPro HDby Aberglaslyn13,947 views
- 5:21Cylinder Head Valve Lapping Land Rover Engineby trailerfitter22,659 views
- 2:07Triumph TR6by alexfalize2,302 views
- 2:021973 Triumph TR-6 In Actionby samspace813,007 views
- 0:22Block Honingby carpartsmachine53,915 views
- 5:14LS1 Head Portingby AGearHead4Life4,332 views
- 6:329x Triumph TR6 - Lovely sounds!! 1080p HDby carchannelclassic9,508 views
- 4:15TR6 Engine Build Part2by mctim643,566 views
- 1:32Wishbone Classics' Uprated Triumph TR6 J-Type O...by WishboneClassics4,868 views
- 3:47TR6, Drive through Kings Canyonby mctim6410,719 views
- 0:27TR6 Finally Running correctlyby Dusty160913,243 views
- 4:07TR6 cam degreeing, Engine Buildby mctim643,495 views
- 3:30dans triumph tr6by danski5558,223 views
- 5:50TR6 Engine Build Part1by mctim643,424 views
- 4:15BRODIX Cylinder Head Repair Videoby BrodixCylinderHeads132,860 views
do you have any dyno data from this work? my father and I are rebuilding a 1974 with a 72 motor. Looking to do "bang for the buck" mods to her now. Would love any advice. Im in Va. Where are you? Do you have finished heads that you would exchange for a solid head (core exhange) and $?
We have a 6-3-2 Header and a light fly wheel. I want a 225hp (crank not wheel hp) for this little baby. My old man has a Honda S2000. I know that its going to be a PRICEY jouney but hell, why not?
jessamine809 3 months ago
@jessamine809
To be honest I think you will have a bit of trouble getting 225 out of a TR6, The head design is not the best and the B&S combo don't work well for high revs. My car has a supercharger on it and it makes about 170 at the wheels. (there is a video of the dyno test) I've heard of one guy that got 210 out of his but it takes a lot of boost. Mine is more just for fun and it gives you a good "kick" when you step on it. If you put too much HP in this car the trans. and rear will go.
mctim64 3 months ago
What was the interference fit on the seat inserts? From the look of it not enough.
eurokid83 8 months ago
@eurokid83
Thank you for your concern.
mctim64 8 months ago
Very nice to see how the job is done. How many hours were required to do this job?
cybersurfer1969 3 years ago
Three to four hours, I didn't really time myself, but about that.
mctim64 3 years ago