www.xlsperformance.com
The LED Turn signals are Clear LED arrows that have a self adhesive backing on them. It has a positive transparent wire /white. It has a negative transparent wire. Run both wires behind the mirror and through the door jam, Under your dash to your fuse box. Connect the positive wire to your turn signal flasher fuse. Ground the negative wire off. Once they are Connected when you put your turning signal on it will flash on your side mirrors which ever way you are turning. The set comes complete with instructions and the pair of signals. It will look the same as the luxury cars that come stock with them.
Our LED Arrows are Perfect For Cars, Trucks, Motorcycles, Scooters, Snowmobiles, Trailers, Campers, RV's, Motor Homes, Semi
Just make sure that if you are going to use these in the United States that you make sure to get red or amber to avoid accidentally violating DOT equipment requirements.
doctapeppamanjr 3 days ago
@hondascoot I love the ones behind the mirror! If it was easy to do it on a car I'd totally do it.
TJC450 2 months ago
@TJC450 They work well. The wires on the mine were just barely long enough to reach the the signal light wires on my motorcycle. I used posi-tap connectors so they will be easy to disconnect. I would not say they look ghetto, you can see a little bit of the wire coming into it. But they don't look as good as the led's that go behind the mirror.
hondascoot 2 months ago
just got those turn signal blinkers and I see some comments saying that they're too bright...will they blind me? you know what i mean...
eldannytx956 2 months ago
@hondascoot so they work pretty well?
easy to install? or do they look ghetto.
TJC450 2 months ago
I bought a red set from PepBoys for $10, plenty bright at night, kinda weak in the day time.
hondascoot 1 year ago
site don't work
itsbeny0 1 year ago
ya , i got the red ones from canadian tire,lol,
and man they are bright at night, i dont know if resistors will subdue the brightness so i can put a switch for nighttime, but oh well..Oh and umm to install you have to remove your side mirrors depending on car of course, route wires behind mirrors thru the door panel and thru rubber grommet (for clean install look) or exposed ghetto style like mine, then wire on turn signals. This dude should have done a diy. Btw, the can tire has short wires.
ancientpimp 2 years ago
i installed these as well in red, not to try to help this guy sell his turn signals but damn they are bright, i had them for 2 and a half years now...
03IMPALASS 2 years ago
Well...i bought this kit from them...and you tape them to your mirror with the 3M backing...preferably close to the outside edge...and run the wire behind the mirror into your door pannel...through the door panel...you run it to your blincker lights that runs to your head light unit...LOTS OF WORK...but its well worth it...these things are BRIGHT...and when i say bright....BELIEVE ME!!!!
DJFirestorm07 3 years ago