HTC Sensation Glass Digitizer Replacement Repair HD Complete How To Fix Tutorial DIY

-Visit http://www.iRepairFast.com for the best price device repair in the industry!
-Check us out on Facebook! http://on.fb.me/o0OE7Y
-Please Subscribe!

Category:

Science & Technology

[roomN101]

i have replace my touch screen ot htc sensation and the display is not working now what may be the problem to that and i have cheked all the conector cabels they are in place so i have no idea any help ?

thanks

[iRepairFast]

@roomN101 If you have checked the connectors (fully inserted and clamped down).Then it is a possibility you have shorted out the LCD. Sometime this happens due to electrostatic.

[88Lister]

when you removed odl glass, there was something like glue what you melted by heater... - and then, new glass you what? just was pushing on sides and that's it? without anything like glue? Why? ---

and I want to replace both display and glass on my sensation, so I will buy set of glass sticked to the display... - will I need to use heater to remove old screen+glass?

thanks for helps :)

[iRepairFast]

@88Lister replacing the digitizer and LCD together will save you a lot of effort in removing the old adhesive, as that is mostly found between the two.

[kingmichael428]

What kind of adhesive do you use and where can I get it?

[iRepairFast]

@kingmichael428 search "HTC sensation Tape" on eBay. Good luck!

[iRepairFast]

@ToInfinity1 It's actually very common in the repair industry to use guitar picks, they are shaped perfectly for prying open plastic frames without damaging them.

[C3l3b0rn]

I broke my display trying to replace the digitizer... Would not recommend trying to do this without prior experience of replacing spare parts on this type of products!

[OpaIsh]

Hi, What type of adhesive glue did you use? 3M stickers? or? Thanks.

[Mushfiquemosha]

Gorilla Glass Breaks that easily ?

[GadgetKid99]

Or take to a repair shop...

[88Lister]

@iRepairFast and between display and the rest of phone, there is no adhesive?

[iRepairFast]

@SexySucy29 Try checking the LCD Connector to make sure it's fully inserted and flush. Depending upon where you bought the digitizer, it could have to do with the fact that it's a lower quality aftermarket part. We sell only high quality or OEM parts on our website.

[iRepairFast]

@SteveDGamer Yes, a new case would help to protect that area and keep the chip from spreading. Enjoy!

[iRepairFast]

@SteveDGamer Yes, a new case would help to protect that area and keep the chip from spreading. Enjoy!

[iRepairFast]

@bsyerk Yes it is. The digitizer is the part that senses your touch, and it is attached to the underside of the glass you touch.

[iRepairFast]

@danilat0r Try checking the LCD Connector to make sure it's fully inserted and flush.

[danilat0r]

hi i replaced the digitizer and when i started the phone afterwards everyting worked but after 1 second the screen turns "light" black and everyting else is still working correcly, and if i hit the on/off button to lock the screen it turns black as usual but when i turn the screen on again it works like one second then it turns "light" black again, so i can see all the colors and the backround for 1 sec then i must hit on off again. do you have any idea what i should do? (sry for my bad english)

[bsyerk]

So digitizers are the outer glass layer?

[SteveDGamer]

I bought a second hand one off ebay because I don't earn much but it's got a small chip on the bottom left hand corner of the phone. I dont know if getting a new case would solve the problem but any advice / help would be appreciated.

[SexySucy29]

I replaced the screen and the phone turns on but the touch screen stopped working. Idk what to do :(

[HODHAN0]

BEFORE START MAKE SURE YOU HAVE ALL TOOLS OKAY

[studentu01]

what happened with the gorilla glass?

[Renesance86]

Shaky hands not recommended :) Anyway I'm suprised that kind of very sensitive micro SMD boards can be replaced with bare hands without damage...

[hairymcnutts]

be sure the numbers on broken screens ribbon match the numbers on the new one,,,,not all screens are created equal....u may find that your new screen is not as responsive as ur old one once was. this is because the numbers dont match. make sure when u buy it from ebay or amazon that u ask the seller what the numbers are on the ribbon.......

[TheDirslikas]

Now this guy can surely solve the most annoying sensation "dust problem" (: