DIYINHK DDC PCB MOD Sanyo DDC-1 Installation Video
Loading...
Uploaded by Martinm210 on Apr 16, 2011
This is the Sanyo controller version from DIYINHK on ebay. This is for repairing broken DDC1 or DDC2 pumps. It gives a small boost to performance and reduces noise a bit as well over the original DDC1.
My first time trying this, so I didn't really know what I was doing...:)
Fine tweezers would be a really good idea to remove the winding wires from the original PCB. Also you should pry up at the IC to break it free not like I did. You should also do a better job at cleaning up old glue. Anyhow....this is how I did it, and it worked when I was done...success!
Uploader Comments (Martinm210)
All Comments (6)
-
Do it yourself in Hongkong. Cant work
-
nice work.. I didnt know we could change the pcb of the pump
-
looks like an arc reactor from ironman
14:31
DIY Swiftech MCP355 / Laing DDC3.2 Pump Repair Guide - Walkthrough - DIYINHK - Part 1 of 4by zip1385675 views- 12:33
DIY Swiftech MCP355 / Laing DDC3.2 Pump Repair Guide - Walkthrough - DIYINHK - Part 3 of 4by zip1385610 views
- 0:26
Laing DDC+ Pump + Alphacool Laing DDC Acetal Topby hwluxxbundymania1,211 views
- 0:34
Flow rate with laing ddc.by LepseudoAlakon222 views
- 0:25
MCP350 Pump Noiseby Aver82380 views
- 5:42
DIY Swiftech MCP355 / Laing DDC3.2 Pump Repair Guide - Walkthrough - DIYINHK - Part 4 of 4by zip1385544 views
- 1:49
XSPC Dual 5.25 Reservoir for Laing D5by rennon19993,507 views
- 1:37
XSPC Dual Bay Reservoir Pumpby Martinm21041,236 views
- 1:03
DDC-1T Rpm modby cfreak994,241 views
- 5:28
XSPC acrylic reservoir top for ddc/mcp pumpby bigbone384,616 views
- 4:45
Pump Noise Round 1 - Laing DDC 3.2 + Koolance COV-RP400 Topby Martinm210738 views
- 3:37
DDC - Amor Animalby 1nexplicable2,459 views
- 3:28
GBC laminator mod for making PCBs.aviby jheissjr4,045 views
- 0:21
ddc3 2by veriz1111549 views
- 6:32
Samsung SCC-A2333 Infrared filter removalby BallaratDragon2,260 views
- 0:25
Alphacool Laing DDC Ausgleichsbehälter (Reservoir) und Aufsatz Combo Rev. 2by hwluxxbundymania4,420 views
- 7:54
DDC Mlimani Park Orchestra: Binamu [VCD]by Jarawilla3,412 views
- 22:50
الحلقة الثالثة: من رسالة الذل والانكسار.by almosleh61 views
- 6:13
Petra'sTech DDCT-01/01s Install Instructionsby PTPetra5,310 views
- 1:00
Laing + Eheim + WB.mp4by LepseudoAlakon130 views
No solder sucker? Solder sucker made it a lot easier for me when I was pulling pumps apart.
PTPetra 10 months ago
@PTPetra
I don't have one, but that would probably help a bunch. I guess there is soldering wick that would do a similar job. The main tool I was lacking was some fine tweezers though, you need something very find that can pull and hold the wires in place while both desoldering and soldering back in place.
Martinm210 10 months ago