HVAC military alphabet and the College Conspiracy.
Uploader Comments (DrZarkloff)
All Comments (44)
-
Dr. Z, I gave the board to my boss today. He saw no visible damage on it and concluded that it is probably the relay, and because he was in electronics for ten years, assured me he can and will be replacing the relay on the board. He said it like it was easy as changing a run capacitor or something. The solder gun has a vaccum on it, and pulls up the solder, when melted. Then the relay just falls out, and he puts the replacement relay in and solders it. Whala, good as new! We'll see
-
@blissJesus1 You could have a bad relay to the blower motor or if the blower relay is integrated with the board you'll need to replace the entire board.
-
Dr. Z,
I have 240V at L1 & L2, On the IIC board. When I put my leads on L2 and the Heat terminal for the blower motor, I have 16V (should be 240?), then, after 30 secs. blower relay clicks, then 21V momentarily, then back to 16V.
-
@blissJesus1 Is the line voltage 240V or 208V? If you have 208V and if the control transformer is set up on the 240V tap then you could be getting 21V instead of 24V.
Another possibility is that a bad control board could be the problem, especially if the control transformer is integrated into the board.
Another possibility is that you could have a loose control wire connection somewhere.
College degrees tend to teach people to think "inside the box." Any thoughts that deviate from your professor's result in poor grades ensuring a set of graduates that all think the same.
Have you ever noticed the real pioneers do NOT have degrees?? We need more independent thinkers who aren't taught to stay within the limits.
Good video!
scottphys 1 month ago
@scottphys Thanks. College Conspiracy was a real eye opener for me.
DrZarkloff 1 month ago
Quebec
MrTeetsybeast 1 month ago
@MrTeetsybeast I can't believe that I forgot poor little Q. It's rather embarrassing.
DrZarkloff 1 month ago
very nice video on conspiracy
winkhvac 1 month ago
@winkhvac It was a real eye opener for me.
DrZarkloff 1 month ago