Wrapper for Netduino + ShieldStudio 4-digit LED matrix shield
Loading...
Loading...
929
views
Loading...
Uploaded by iDoggyDee on May 1, 2011
I wrote a wrapper to control the ShieldStudio 4-digit LED matrix instead of the basic sample.
Details and source code available here:
http://dennisdel.com/?p=727
- 5 likes, 0 dislikes
-
- 3:54
Lifelike NetDuino Emulatorby hwiguna5,892 views
- 2:48
LED Matrix Project Phase Iby coolpablovideo276 views
- 0:51
Graduation Cap Mod Overviewby yomogaocho39,610 views
- 4:21
Netduino Plus - Ethernet and LED Project (First Project)by VCSandARM8,919 views
- 3:07
Pandora + Music Library on Windows Phone 7 - PoCby iDoggyDee895 views
- 0:36
Arduino Driven 7 Segment Displayby simharry3674 views
- 1:32
Netduino Access Control Systemby mrmjordan2,577 views
- 0:32
Netduino and GSM Shieldby CrispinProctor696,005 views
- 1:00
Netduino RC robot.by jonasfreij709 views
- 0:18
Netduino KS0108 Graphics LCDby rocehsstuff2,962 views
- 1:02
4 x 4 RGB LED Boxby Gillerire1,893 views
- 1:39
netduino AdaFruit ST7735 TFT Display.3gpby froyer672,736 views
- 0:30
A Netduino controlling 5 servosby sthoolen1,022 views
- 1:14
Scott Guthrie & Laura Foy - Kinect Demoby iDoggyDee357 views
- 0:33
Webcam on Windows Phone 7by iDoggyDee1,234 views
- 15:00
Mix11: Day 2 Keynote - Part 7by spoonly100142 views
- 3:43
4d systems screen netduino fezby azroadie442 views
- 1:43
Netduino with accelerometer and 16x2 LCDby theflyingman2588 views
- 3:11
Netduino with a piezo speakerby RayMckaig813 views
- 1:19
Netduino plus web serverby Undeworld667485 views
Good demonstration. So to flash all digits simultaneously you can use the automatic blink function. This is controlled by the display controller and does not need any code besides turning the blink function on. If you keep the 2nd page blank and turn blink on then all characters will blink simultaneously when the driver chip switches to the 2nd page. Automatic blinking supports fast and slow blink and frees up your processor. All segments are also in sync.
shieldstudio 10 months ago
@shieldstudio Thank you for the feedback! This was more of a proof-of-concept video. I will try extending this sample even more.
iDoggyDee 9 months ago