#238 HHO run time test update 2-17-2010
Uploader Comments (ZeroFossilFuel)
All Comments (57)
-
@ZeroFossilFuel Looked like the positive red stay con was shorted to the case Just a thought Watch everything you put up Thanks for everything you do Zero Keep it coming Lee
-
@ZeroFossilFuel looked like the positive terminal was shorted to case. That red wire staycon may
be grounding out Just a thought Watch everything you put up Thanks for everything you do Zero
-
@ke4uyp Coming. Here's a teaser. Very encouraging data. BTW, been thinking about the other comments you made about wavelength vs plate spacing. If what you propose is correct, one should be able to dunk a couple of plates spaced about 6" and hit it with 450MHz UHF to liberate HHO. Personally, I think it would just heat the water.
-
@ke4uyp Okay folks. It has taken my entire weekend to compile the data but the results are finally in and they're not as bad as I originally thought they might be. Need a couple of days to put it all together. Be watching for a YouTube update and the spreadsheet results posted at alt-nrg*org.
-
@ke4uyp I have 3 sets of data (9 runs) with 5.00oz of fuel. Ran way too long. Going to start over with 3.00oz each run and a minor change to the upper fuel bowl. Video is coming. I have also been streaming it live at Ustream.
-
Keep up the good work. Setbacks are an unfortunate fact of life, but don't blame yourself or let it get to you. Take a deep breath and just think of the long term good you are achieving. Spirits high and rise to the challenge.
Regards,
Joe
-
im so sorry with you!
please push on.
Thanks.
Did you wire up the charge indicator light, I did not see the wire at the rear of the alternator?
ray190te 1 year ago
@ray190te No, that's the terminal that shorted to the battery output.
ZeroFossilFuel 1 year ago
yeap, cooked that alt, take it to rebuild shop, you'll probly find that the internal regulator is toast, there about 12.00 buck Zero IF you have a frendly rebuilder
NewWorldFuels 1 year ago
@NewWorldFuels Diodes tested okay. Went to the repair shop today for a new regulator, only $15. Didn't fix it. Had them check the quick start module. It was good. Coils show continuity. No signs of burnt wiring. I'm stumped. Dropping the whole thing off tomorrow morning. Hopefully it's fixed by end of day.
ZeroFossilFuel 1 year ago