How to disassembe a Phil Wood bottom bracket
Loading...
Loading...
3,482
Loading...
9:11
Bottom Bracket differences -WHY they are CRITICALby StudioCycles7,999 views- 2:52
My latest track bike buildby phatnum1720,276 views
- 1:53
How a bottom bracket should spin!.wmvby HawkRacingUSA30,962 views
- 3:53
How to Use: Cyclo Tools Bottom Bracket Threading Toolby nutmonkey514,260 views
- 7:35
Changing sprocket on single speed with eccentric bottom bracketby pucko200015,338 views
- 1:07
Phil Wood Spoke Cutter in actionby shmattson7,137 views
- 58 videosbike repair
- 0:31
Phil Wood hub Mavic Open Sport Peter White wheelby slmcgra983 views
- 5:21
Fabian Cancellara attack on Tour of Flanders 2010by JanUllrich02232,979 views
- 0:36
Enduro Zero Ceramic Bearing kit for Shimano External BB 陶瓷培林,轉7秒鐘才停by vandenlab11,286 views
- 1:35
phil wood open house, san jose videoby steeleejoe260 views
- 1:00
Lazy Saturdayby Boods20925,948 views
- 7:34
Old-School bottom bracket, part twoby ampdavolts80,057 views
- 0:53
ShadyRide #2 RidersRideby Papichat624 views
- 6:27
Old-School bottom bracket service, part oneby ampdavolts54,415 views
- 4:42
How to build a bicycle for travelling around the worldby BikeTechBCN36,650 views
- 1:07
Bottom Bracket Removalby element4all16,912 views
- 4:58
BB Install - Rivendell Bicycle Worksby RivBikeWorks6,976 views
- 0:43
Enduro Bearings SRAM vs. Shimanoby EnduroBearing8,714 views
- 11:27
Replacement of a Shimano Press Fit Bottom Bracketby welovemountains27,783 views
I think assembly is quite a bit more involved.
If your BB is symetrical, it might take quite a bit
of trial and error to get it right. Seems like you'd
want to make measurements before disassembly.
Just say'n...
scatt99 1 year ago
I just got off the phone with PW and they told me that the shoulder on the spindle goes toward the drive side. I know this cause I installed the other way and my crankset "walked" away from the frame! Make sure the bearing seats against that shoulder or your spindle will float!
jitterspec 1 year ago
Thanks! How about a reassembly video as well? Are the bearings pressed one at a time? Or do you use a special fixture on the press to do both simultaneously?
sircumshot 1 year ago