TUTORIAL''How to install xbox360 motherboard inside a pc case.

This video will show you how to install your 360 motherboard in a pc case,you can also use the pc power suply'..to do this you do have to know how to take things apart and tinker with things.((((never turn on the 360 with out the dvd drive plugged in andnever turn it on with out the fans cooling the heat sinks)))to extend usb ports just plug in a usb cable to the 360 and cut the cable at around 6'',expose the wires,they should be green,white,black and red..now the pc should have cables for the usb ports somewhere, they also have the colors green,white,black and red, cut it and color matched/wire them to the360 usb wires,this is the basic things you will need,any questions i will gladly answer,,use the pc molex plugs to add fans lights etc,yellow is12v and red i think is 5v black of course is ground...good luck'

Category:

Gaming

Tags:

• quick scope drop shooting jtag
• BLACK OPS
• 15 PRESTIGE
• drop shooting
• drop shot
• 360 hacks
• modding
• 360 led
• rapid shooting
• led's
• ps3
• case modding
• xim3
• xim2
• eagle eye
• xfps
• fxps
• razer
• lykosa
• wii
• mw3
• moddern warfare 3
• aimbot
• psu mod
• rrod
• water cool
• psp
• emulators
• menu
• playercard
• gamertag
• fan mod
• window mod

[TheCraigjaay]

hey, ive just started modding my mac g4 case to accommodate my 360 mobo. ive run into a few problems, i dont know what psu to use, i know something around 250w, but non ive seen match the specs of a 360 psu. (i'm uk btw) any help would be muucho appreciated

[ModGyver]

@TheCraigjaay look for the psu 12V OUT PUT, AND 5V THEN WIRE THOSE TO THE XBOX PSU PLUG THE ONE THAT PLUGS IN TO THE XBOX MOTHERBOARD..YELLOW (ON PLUG) WOULD BE 12V RED 5V BLACK GROUND..ALSO YOU HAVE TO KNOW HOW TO TURN ON THE PSU..IM NOT FAMILIAR WITH MAC PSU THOUGH, BUT THAT SHOULD DO IT..GOOD LUCK.

[TheCraigjaay]

@ModGyver kool thanks, but what PSU are you using? thanks replying.

[ModGyver]

@TheCraigjaay atx gaming psu 650W but all atx are done the same way, just bypass green wire with a ground and it will turn on the psu,(on atx though)..

[EwOkiE2]

Hi I am trying to follow your mod just for the xbox360 Inside the Case...

Can you explain on how you did the following please :

1. Hard drive

2.Power button

Also for the DVD drive Eject and Sync... where to solder ?

Thanks

[ModGyver]

@EwOkiE2 power button has 4 points 2 of them triger thr power on. bypass them with a wire to figuer out wich 2 points make them turn on, the eject would be the same, it has 2 pins behind it they go to the button your adding, doesnt matter which wire it goes to, the hard drive i just opened it but is an xbox slim drive.

[ModGyver]

@EwOkiE2 just look for fans that are the same size..or at least close to the same size, then just take screws and screw them on, the screw will pass through the fan and in to the heatsink,separating the heatsink blades just a little ..screw in to heatsink around quarter inch.

[EwOkiE2]

@ModGyver

Thanks for that!

How did you install and where did you get the fans for the heatsinks

[ModGyver]

@acsounds no problem,,since im using pc pwer suply , i get power from the molex plugs, althow i still use the 2 12v fan outputs from the xboxm motherboard, i just replaced the xbox fans for pc fans and bolted them right on the heatsinks.

[EwOkiE2]

@ModGyver

Thanks for the help.. where did you get the fans and how did you connect them?

[ModGyver]

@ModGyver do the same with sync...you can use ground from the shield surrounding the button..good luck..