Traxxas 1/16 E-Revo VXL 4S LiPo Test Run #1
Uploader Comments (Addikti)
Top Comments
-
@MrTjchase Now where's the fun in that, if I may ask?
-
Why turn off the low voltage cutoff?
All Comments (294)
-
Nopeesti saitte paskaks
-
I have had that clicking in the gearing happen too but it's just the back one of mine and I think it's just stupid that it happens for the money that I spent on mine.
-
I have all traxxas 1/16 cars I love them by far my favourite is the e revo vxl I run 3s lipo and upgraded suspension and metAl upgrades does around 70 mph and nearly does double backflips from a stand still
-
get a center diff
-
hello i have a 3650 motor 9t ..what do you think..could this handle 4s lipo?with a 120a esc 1/8?
-
What batteries are you using?
-
take the wing off and soften the rear spring to stop it from lifting.
-
the clicking noise is your front or back center diffs
-
Cooles Video
hi mate!i nave the same problem with the rear diff...is this in the garranty of traxxas?or i ll have to pay and fix it on my own?
gufterica 3 months ago
@gufterica R/C makers pretty much issue no guarantee when it comes to failure by usage, even if there was an apparent design flaw in some parts of the product. Out of the box manufacturing defects would be a different case.
Get the 7029X and 7030X uprated bulkheads if your car didn't come with the preinstalled. The easiest way to tell the difference between the original and uprated designs is the long lateral screw in the latter.
Addikti 3 months ago
what charger/balancer do you use? i have the same lipos, but i use a turnigy balancer/charger and my lipos dont have the power yours does could you help?
hammell557 5 months ago
@hammell557 It's the Turnigy Accucell-6 so nothing special there. I also tend to balance the packs after every run, but that's not it either.
Addikti 5 months ago
@Addikti okay,will say iam a noob to lipo but not rc. an i have noticed my lipos dont really gain any power after i used the balance/charger, should i just switch to a lipo charger that charges threw the batterie cables its self? if i even can..
thanks for the help to much needed
hammell557 5 months ago
@hammell557 Wait, you haven't connected the pack's power leads? When blalancing, the big charge is always delivered through the main leads and the external balancing wires are used to equalize the charge in the end of the cycle. You need to connect both the main leads and the balancing wires at the same time.
Addikti 5 months ago