Requirements :
Windows XP, Vista, 7 (32 or 64bit)
Sn0wbreeze V 2
.NET Framework 3.5
iOS 4.1 for iPhone 3G
iOS 4.1 for iPhone 3GS
Download These Required Softwares From:
http://bit.ly/jailbreak69
or
http://wowtutorials.net
Download PDF tutorial from :
http://www.megaupload.com/?d=489HSC83
Description:
Guide to Jailbreak With Sn0wbreeze
Step 1. Download the required files and make a folder on Desktop called "iHackintosh" or whatever you want and put the Firmware iOS 4.1 and Sn0wbreeze tool in iHackintosh folder. Launch Sn0wbreeze ( Windows Vista/7 user start the application in administrator mode) and connect your iPhone via USB to your PC.
Step 2. Click on the arrow to go to the next step, we now have to choose between Easy or Expert mode.
Simple Mode - Which provides step by step instructions as below and automatically detects your correct firmware and adds the unlock and activation and jailbreak with Cydia automatically to your
custom firmware.
Expert Mode -- Where you can adjust the settings on the various different additions to the custom firmware -- if you click through and do not change anything in expert mode it will make the same.
Step 3. At this point we have to choose the firmware to select, then click on"Browse" and find the firmware we downloaded earlier and click Open.After selecting the firmware application automatically detect the device on which will go to jailbreak, then go ahead.
Step 4. Going in order, click on "General" and advanced once again. At this point, if you make a JailbreakiPhone, the application asks us if we activate our iPhone.
Step 5. Now you'll be asked to choose to unlock for your iPhone.
1. If you are using an Official service provider (i.e. AT&T) you do not need to Unlock Baseband, select NO.
2. If You are using an Unofficial service provider (i.e. T-Mobile) then Select YES
Step 6. In next screen you have a choice to install Cydia or Rock or both, if you'd like to take my advice installCydia only.
Step 7. It 's time to choose the packages to be included in your firmware. We can choose between:
Repository pre-added;
Manually add a repository (currently this feature is not available);
Add. Deb that you have on your computer.
We're done with all the customizations! We can now proceed to create the firmware, click on "Build IPSW"Now we have to wait a few minutes to create the firmware and complete procedure can close theapplication.
Step 8. Now put your phone in DFU / Recovery mode [we suggest for DFU mode].
to put your iPhone in recovery mode :
1. Turn the device completely off and disconnect it from cable/dock.
2. Hold down the home button.
3. While holding down the home button connect to a computer with a cable (easiest) or dock.
4. Keep holding down the home button until you see a connect-to-iTunes screen You are now in recovery mode.
to put your iPhone in DFU mode :
1. Connect your iPhone to your computer.
2. Turn iPhone off.
3. Hold power and home together for 10 seconds (exactly).
4. Release power but keep holding home until the computers beeps (observed on a PC) as a USB device is recognized.
5. A few seconds later iTunes should detect your iPhone.
6. If the Restore Logo is present on the screen, you are in Recovery Mode, not DFU.
Step 9. Open up iTunes and you will see a warning message which is communicated to you that you have connected an iPhone in recovery mode, click OK and move on.
Step 10. Then click on the Shift key on your keyboard, and simultaneously with the mouse on the Restore button in iTunes. Browse the firmware you just created.
Step 11. Wait for iTunes to complete all procedures for extracting, testing and repair of your iPhone / iPod Touch. We're done!
*IGNORE*
Jailbreak iPhone 4 Jailbreak iOS 4.0.1 Jailbreak iPhone 4 JailbreakMe
Jailbreak Unlock iPhone 4g iPod Touch Jailbreakme Jailbreakme.com firmware spirit ios4 3g 3gs ipodtouch 2.0 4.0.1 iphone iphone4 legal iOS 4.0 free ipad 2g 1g all cydia ipod iphone cell phone electronics easy way to install download jailbreakme jailbreak me how touch 2g 1g 3g 3rd 2nd 1sr gen generation 3gs jailbreakme.com electronics iphone phone cell cellular at&t unlock carrier
How To Unlock iPhone 3G 3Gs on 4.0 Firmware UltraSn0w ultra sn0w ios ios4 os 3.0 apple ipad iphone baseband smart phones unboxing instructions wireless laptops video review gadgets hacks electronics
jailbreak for ipad iphone ipod touch untethered 3.1.3 3.2 cydiaSpirit Jailbreak For IPad iPhone 3G 3Gs iPod Touch 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 5.0.1 5g
Additionals tags:
Jailbreak 4.1
Jailbreak iphone 4.1
Jailbreak iphone 4G 4.1
JailbreakiPhone 4G 4.1
Jailbreak iphone 3GS 4.1
JailbreakiPhone 3GS 4.1
Jailbreak iphone 3G 4.1
JailbreakiPhone 3G 4.1
Jailbreak iPad 4.1
JailbreakiPad 4.1
Jailbreak iPod Touch 4.1
Unlock 4,1
Unlock iPhone 4.1
Downgrade 4.1
4.1 Firmware
4.1 beta Firmware
How to Jailbreak 4.1
Loading...
5:28
LIMERA1N Jailbreak 4.2.1/4.1/4.0.2/3.2.2 Firmware iPhone 4 & iPod Touch 4 & 3GS,3G,2G,MC Downloadby lohtis15,333 views
Neew Woorking Jaibreak relleased! Usee thiss linkk: latestjailbreak․tk
STARNAIKENBERRY 5 months ago
surveys.. :) I HATE THEM!!! :S
XpucToTaweBXpucToB 1 year ago
So... the requirements say 4.1 bu you say 4.0.2, which one is it? I have 4.0.2.
Arnautovic13 1 year ago
nice
vacktomi 1 year ago
tahnkssss
roflgunner 1 year ago
@shareage2 does this work?
mrpoohwooh 1 year ago
Thanks im working according to da tutorial
thanks
shareage2 1 year ago 2