Blade 450 3D FPV setup
Loading...
Loading...
465
views
Loading...
12:13
Blade 450 3D Mechanical Setup tutorialby bladehelis11,404 views- 8:58
Basic Collective Pitch setup using a DX6i part 3by nuttcaze62,620 views
- 6:37
Blade 450 3D - Beginner level FPV - No vibration!by kooleco7,844 views
- 4:10
Blade 450 Flying and Crashingby seracjumar646 views
- 7:30
Unboxing the Blade 450 3Dby georgesjunglerc351 views
- 7:31
FPV of Blade 450 3D Fitted With GoPro 2 Hero and KDS Flymentorby protogrob334 views
- 9:03
Blade 400 3d Head Setup Part1by sokal1165,229 views
- 2:36
Neil's Blade 450 3D oops wrong inputby SundonModels303 views
- 18:05
DX6i & CCPM Full Setup Guide Part 1 Setting Up The DX6iby RcHelpDotCom18,816 views
- 10:45
HorizonHobby.com Preview - Blade 450 3Dby HorizonRCdotCom66,944 views
- 9:07
E-flite Blade 450 Unboxing & Maiden Flight!by earthling198418,182 views
- 8:01
BLADE 450 FPV CAMERAby gr82laugh1105 views
- 3:58
Blade 450 3D in Actionby kashew201ps34,147 views
- 4:29
Trex 450 FPV - Speed recordby JonathanMenaDolder9,200 views
- 4:46
Blade 450 3D Heli with a GoPro HD camera onboard by Ericby joehandsome997,757 views
- 2:06
The new Eflite Blade 450 3D strait out of the box setup.MP4by krasjtest927 views
- 3:49
E-Flite Blade 450 Flyingby joehandsome9941,268 views
- 6:28
Blade 450 3D Helicopter Unboxing & First Reviewby rcflightschool9,506 views
- 3:26
E-Flite Blade 450 3D Flight! Stock setup!by earthling198431,251 views
- 7:32
Blade 450 FPV with SN555by thai2day374 views
@441rider I bought the one from CNCHelicopter that is recommended by the Blade 400 Bible to replace the stock 420 motor, the shaft is a different size 3.17mm/.125" so I drilled the pinion out on my lathe, also had to shim the motor up with washers as the shaft is longer as well. But it works good.
thai2day 1 month ago
Is that a 380 or 370 sized motor?
441rider 1 month ago in playlist More videos from thai2day