Automatic Transmission Rebuilding DVD-Servo Removal-4L60E

Click here to purchase the GM 4L60E DVD http://store.boxwrench.net/GM-4L60E-Transmission-Rebuild-DVD_p_32.html

GM 4L60E Transmission Rebuild DVD: 2 - 4 Servo Removal

Removing the 2 - 4 servo is not that hard. First remove the snap ring, then pull up on the 2-4 servo with pliers to expose the o-ring. Now you can cut the o-ring and pull it out with some pliers. Then you'll carefully remove all of the internal parts.

BoxWrench.net is a community and resource designed for automotive enthusiasts.

Get the full DVD with all of the sections here...
http://store.boxwrench.net/GM-4L60E-Transmission-Rebuild-DVD_p_0-32.html

Get our full "Basic Engine Building" DVD with all of the interactive menus, Tools section and engine Glossary terms here...
http://store.boxwrench.net/Basic-Engine-Building-DVD_p_14-8.html

Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here...
http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_14-12.html

New Transmission DVDs and a Differential Rebuilding DVD just added.

BoxWrench DVD Store:
http://store.boxwrench.net/DVD-Video_c_14.html

http://www.boxwrench.net - Educating the Automotive Enthusiast!

BoxWrench on Facebook:
http://www.facebook.com/boxwrench

Category:

Autos & Vehicles

Tags:

• GM
• Automatic
• Transmission
• Rebuild
• 4L60E
• TH400
• Turbo
• Hydramatic
• 350
• repair
• 2-4
• servo
• kit
• tutorial
• automobile
• racing
• vehicle
• diy
• installation

[imjustpassinthru]

Neexxt, I got a question. I wish I could figure out what's wrong with my 4r70w Ford trans with 100k miles. Shifting good and tight, no slip, clean fluid. One problem: After I have trans in reverse, then shift to drive, it doesn't want to shift out of 1st gear. Have to take foot off gas, let rpms drop to near idle then it drops into 2nd. Once that happens, it shifts perfect until the next time I put it in reverse. Tried replacing neutral safety switch, didn't help. Any thoughts?

[BoxWrench]

Our only ford transmission rebuild DVD is for the AOD.

I'm not personally familiar with your particular model of transmission.

[imjustpassinthru]

I like the way this guy talks. Are you from Kentucky? He sounds like he's been teaching this for a long time and has trained a lot of knuckleheads.

[BoxWrench]

The director of this project is a really cool guy.

He's from Texas and has well over 25 years experience with Transmissions...he knows what he's talking about.

He jokes about the "Neeext" comment all the time. We think it's made him famous...

[bliss1083]

Looks like I will need this video...

[AmpegV4]

LOL...NEEEEEXT !

[imjustpassinthru]

@imjustpassinthru .... It's one year later after I posted that about the old thing of my 4r70w transmission not wanting to shift out of first gear. It turned out to be the ECM or whatever you call it., the computer. I had an auto electric shop do a diagnoistic check and they said the computer wasn't "responding.". I ordered a remanufactered one from 1A auto parts online, about $150. Stuck it in myself, simple, no problem, 15-min job. It hasn't missed a shift since.

[cbr900rr919]

@imjustpassinthru the valve body gasket is blown out very common problem in ford/mazda transmissions. get a set of valve body gaskets and replace them if you still have the truck.

[JayzBeerz]

my 99 isuzu rodeo trans just blew up and had fluid and metal bits all over the place. think i can fix it?

[kief4diamonds]

@dodgert70 that and also if you have a cam installed that capable of higher rpm and is set to shift at stock shift points....or so im told.....also make sure you have a good converter and fluids are slightly....slightly above full...i use B&M synthetic.

[dodgert70]

4l60e will a bad servo cause it not to shift out of first to second gear without letting out of the gas.

[suggesttwo]

the 4L60E trans in my bother's truck does not shift into 3rd or OD. any suggestions as the probable cause?

[drufle]

@AmpegV4 Dont forget the return spring.

[BoxWrench]

The BoxWrench web address at the end of the clip, the BoxWrench logo at the top of the page and the store link in the "more info" area of the clip info all have details and links that can get to you the BoxWrench site where you can find the full length DVD.

[4evrthuggn]

hey do you know what the name of the dvd is? is it for sale.

[zacdamac87]

LOL, all transmissions are in about the same place on american cars. Yours would be above the transfercase.

You'll need to buy a rebuild kit if you are to do it yourself. You've got an A4LD transmission. I would suggest you have a professional do it if you lack the knowledge in how to locate it and take it out. Just a suggestion.

:D