Full Bolt on LS1 Dyno. 358RWHP 371RWTQ

Jason Cearley's dyno pull.

Category:

Autos & Vehicles

Tags:

• Camaro

[Txstatez28]

Its my brothers car, but it has a lid, american racing headers, catted ypipe, hooker catback, pulleys, throttle body, and a dynotune by HPT(henderson performance technologies). All through a six speed with stock 3.42's. Its a 2002 so it has a LS6 intake stock.

[nevermissclancom]

I'm glad I don't run into many LS1's with my little GT that only makes 268whp and 310tq. :) LS1's are a force to be reckoned with.

[karpetcm]

Especially 01-02's will pull those numbers corrected on the dynojet with full bolt ons. Im at 336 RWHP corrected with no headers or ypipe through a 6 speed. The LS1 cars pull impressive numbers to the wheels especially with bolt ons.

[MrFootball150]

@payanhilario so is ram air dumbass. a supercharger BOLTS ON so technically it is a bolt on you shit head. as long as you dont change the internals of the motor, its a bolt on you twat.

[payanhilario]

@MrFootball150 bullshit your forcing air inside

[MrFootball150]

You do know that a turbo or supercharger is considered bolt on because it's not internally in the motor and it is bolted on. So it's not full bolt on

[Bamabrute85]

@NAJEE52 Last I heard the world record for a stock 346 cube LS1 with stock compression and bottom end was 519 rwhp. You dont see 500 + rwhp too often but 450ish is really common.

[redefinedz28]

dynoed 311 on a bone stock 01 WS6 A4. After full bolt ons, dynoed 387 rwhp and ran a 12.1 without an aftermarket stall.

[blackbird0230]

nice! I pulled 358.5hp/ 369.7tq with basically the same mods, I don't have a u/d pulley or throttle body but I am also catless. I would die to run head to head with him. If he ever runs post his time. I got a 13.6 up here at bandi so hopefully youre closer to sea level

[nevermissclancom]

@nevermissclancom I finally took the plunge into the LS world. I just bought a bone stock 2005 LS2 GTO. Hope to make 380whp with bolt ons.

[HellionX]

@NAJEE52

I've seen some 450 and in extreme cases 500 without nitrous set-up.

[NAJEE52]

so im curious how much can a LS1 Fbody put down to the wheels ALL motor?

[SLPultraZ]

hell yea! sounds good. when i got my 02 m6 dynotuned it pumped out 353.2HP/369.7TQ to the wheels back in 04. Since then i switched over all fluids to Royal Purple and had the TB and MAF ends ported. Hopefully that should give me the extra 8 rwhp Bo White claims for his ported TB. Last 5 years i've been saying i'll get it to the dyno. my bro-in-law put a vid on his account of my car just starting it up... it's only one in my favorite vids