VAWT with six sails ( wind turbine )
Loading...
Loading...
1,480
Loading...
Uploaded by mekanizmalar on May 3, 2009
This configuration of the check-valve turbine will be used for land based applications, such as on rooftops of urban areas. Each level will have at least three sails and the sails will be offset by 60 degrees from the layer above allowing the turbine to rotate smoothly. For more information on the check-valve turbine please visit: http://www.flapturbine.com.
Link to this comment:
Share to:
Uploader Comments (mekanizmalar)
see all
All Comments (3)
-
mekanizmalar türkçe bir nik siz nerelisiniz
Loading...
- 0:54
sail based wind turbineby curtisdicke1,602 views
- 0:43
OPERATIONAL PROTOTYPE THEMIS WWT-SAIL-6185-V5 07022011039.mp4by ThemistoklisA868 views
- 1:57
green Renewable Energy Roof Top wind Powerby JONOVID53,463 views
- 0:11
PIC_0066.AVIby curtisdicke26,308 views
- 1:15
4.2 kwe/h Vertical Wind Turbine set up @ the Castello in Puchong , Malaysiaby zauberwald11113,001 views
- 4:42
Sail train wind generatorby jurgenaltgreenenergy590 views
- 0:17
Low Wind Turbine for 50 to 250 KW Generatorsby realracecom20,318 views
- 0:48
DIY vertical wind turbine prototype test at 1.4 m/secby GunarsRodins3,055 views
- 0:08
Vertical wind turbine test 3. VAWTby posmatt20012,417 views
- 0:07
STAR VAWT model 3.0by WSBToulouse18,507 views
- 1:03
wind turbine vawt modelby supergokue12,262 views
- 1:01
Savonius Lenz VAWT Wind Turbineby djpole766,706 views
- 9:25
"Wind Turbine" "VAWT" Long Versionby TheWindGinProject144,724 views
- 0:51
How I made my first pvc wind turbineby supergokue1189,132 views
- 2:43
wind turbine vawtby mekanizmalar55,322 views
- 0:13
Video TURBINA VAWT 300 Wind tunnel test 2by tesicm3,369 views
- 1:45
MOLINO INTELIGENTE wind turbine MOD.05by Marcolive211,067 views
- 0:38
Two Vertical Axis Wind Turbinesby sunairpower3,379 views
- 0:50
VAWT Cross flow lift/drag blade turbineby miscbeep109,514 views
I built a turbine with four flags just like yours about 16 months ago but never had the opportunity to build a larger working model like you have. Great job. I have found that the biggest problem comes when the flaps "Flip" at that point my first prototype was torn at the ends of the flags. I tried to fix this problem by using a thin flexible plastic. It worked good but was noisy.
In my experience it a great deal of torque but slow spin and heavy vibration. for more info hwestric @ hotmail.com
AGEOMANOFGAS 6 months ago
@AGEOMANOFGAS Yes my plastic flaps also made a lot of noisy. My new turbine will overcome noise problem. Slow spin is characteristic of these type drag turbines. However since power is moment times angular velocity, this should not be a problem for producing power.
mekanizmalar 6 months ago