Microstepping stepper motor using atmel 2313
Loading...
Loading...
0:34
Comparing a 1/2 Step driver to 10x micro-stepping driverby Soigeneris2,686 views- 0:22
Hard Drive Stepper Motor as Rotary Encoderby ffleurey101,870 views
- 1:03
Stepper motor high speed test with microstep driver MST-107by ptmove2,553 views
- 1:13
Drive-By-Wire system with Atmel Microcontrollersby beneauto4420,945 views
- 1:01
Stepper Motor Microsteppingby lodevijk1,162 views
- 0:47
SmoothStepper first trialsby MikkoKui2,642 views
- 0:53
Two Wheel Balancing Robotby PlaniTechnic50,387 views
- 0:45
Disk Drive Stepper (Homegrown)by ryansturmer38,145 views
- 12:50
Microstepping with Pololu stepper boards on a Gen 3 motherboardby eckertech2,222 views
- 3:28
LamjaStep speed test at 24V and 1/8 microstep - a bipolar stepper motor driverby pilleyuppo231,310 views
- 2:26
LamjaStep - Bipolar stepper motor driver with constant current, microstepping and power save.by pilleyuppo231,161 views
- 0:43
Microstepper for David Laserscanner - version 1.03 Prototypeby 1kreature3,950 views
- 1:38
MachDrive with SmoothStepperby vrasak12,416 views
- 0:30
Moon Patrol (running on Uzebox - Atmel AVR)by claycowgill11,476 views
- 2:00
"Mardus Kreutz" Unipolar Micro-Stepper Test # 3by kreutz54563,032 views
- 1:35
control stepper motorby dangelep2,865 views
- 0:30
rotary dial cell phone made with atmel atmega8by localhosdnet1,570 views
- 0:50
Atmega testboard and stepper motorby stepek906,015 views
- 0:21
Binary clock with Atmel ATmega8by jvolk05,411 views
@hboy007 Hi If I still remember correctly it was 1ohm 10 watts (not so important) Even if you use a ref voltage slightly higher than 1 volts you will have 1A as peak current. The average current would be lower.
Thansk
nesh4321 1 year ago
hi there,
I am currently working on a motor controller that uses L6506+L6203. What sense resistors did you use here? I hope you can get back to me soon.
Greets
hboy007 1 year ago