MXTV - Chad's Mechanical Tip - Greasing suspension linkages
Loading...
Uploader Comments (mxtvshow)
All Comments (5)
-
would this cause the bike to have a more bumby ride on the track
-
Its worth to note here that the roller bearings in the swingarm have NO CAGE. This means the rollers can fall out if your not careful.The rollers are small so if they fall on the floor your not going to be able to find them so be careful!!
great vid, thanks mate, helped out heaps.
-
what year is that bike i hope its a 07 im going to try it out and see what happens!! i aked because i got an 07
-
Thanks!it was helpful...as all of your mechanical tips!
-
Hey...I tried to follow the video and take out the bearings of the linkages but their stuck.I bought my bike second hand and it seems they had never changed those bearings...I tried freezing the linkage with the bearings in and hammered it with all my strengh and nothin...the bearing wont come out...any sugestion?
3:36
MXTV - Chad's Mechanical Tip - Taking your bike out of storageby mxtvshow6,837 views- 3:28
MXTV Chad's Mechanical Tip - Bike Restart part 2by mxtvshow5,683 views
- 4:16
Factory Connection Instructional Video :: Changing a shock spring on a KYB shockby FactoryConnection27,350 views
- 1:38
Bike Race Sag - MMI Tech Tipby UTIGarage1,355 views
- 4:56
How To: Suspension Setup for Motocross Bikes (by BBR)by bbrmotorsportsmedia24,918 views
- 6:01
MXTV Rider Tip - Figure 8'sby mxtvshow17,906 views
- 7:15
Swingarm extension blocks from Spencercycle.comby Metalunique2,856 views
- 3:06
MXTV How to set you bike up for an Enduro eventby mxtvshow4,206 views
- 3:17
MXTV Rider Tip - Hill Climbingby mxtvshow15,622 views
- 1:29
Suspension Check, Geetting the most out of suspension (motocross) with Ken Rocheby team4048,380 views
- 6:41
MX Training - Stefan Everts - Suspension Setupby KTM2Smoke24,342 views
- 0:22
Grant Langston #8 - Broken Shock - Phoenix 2008by evan123t56,414 views
- 3:37
MXTV Rider Tip - Jumpsby mxtvshow17,068 views
- 1:53
Jim Pomeroy Bultaco Swing Armby maicoheadracer2,443 views
- 5:43
Bike Test TRX700xx MXTVby mxtvshow121,313 views
- 2:25
MX-Tech Fork Cartridge Kitsby mxpreview4,196 views
- 1:22
Tip: Don't over tighten your triple clampsby rideroftheweek8,751 views
- 2:38
Factory Connection Instructional Video :: Setting Rider Sagby FactoryConnection36,697 views
- 3:07
MXTV Rider Tip - Corneringby mxtvshow15,326 views
- 2:33
Mechanical Tip - Bearings and Spokes - MXTVby mxtvshow1,836 views
If you have a good vice and some sockets you can press them out by
Putting the larger socket on the outer rim of the linkage and a
Smaller socket against the bearing and use the vice to press them
Out..
mxtvshow 3 years ago