JKSON 8/1 diesel engine again.
Loading...
Loading...
2,312
Loading...
Uploader Comments (bendy2000)
see all
All Comments (6)
-
bendy,
We may never convince India tappets should be flat, I remember a conversation with Metex Technical Rep who attempted to educate me on tappets.. "Mr. George, tappets go up and down not round and round". The fact is, the Salesmen in the head office try and handle this types of inquire, and they fail miserably.
-
Hi, I think these listeroids cost around £1000, a bit either side.
They weigh around 800KG.
-
Dauntless, I bought my Metro 6/1 (bigger flywheels and slower RPM than a 8/1) from Sam Crosby for $1300 a couple years ago.
-
Cool, I like it. How much does one of these cost? And what do they weigh roughly?
Loading...
2:46
My JKSON 8/1 diesel runs on its new frameby bendy20001,881 views- 1:16
Lister CD Diesel Stationary Engine Start Upby ipcress106612,812 views
- 0:46
listeroid generator running my home on oil from plastic.by carbogger32,745 views
- 3:15
Listeroid with electric starter and DC generatorby Petersbpus6,014 views
- 0:42
Lister Engineby lip5er42,171 views
- 2:51
Listeroid Metro 6/1 Genset Electric start with auto shutdownby rocketboy9112,294 views
- 0:34
12 Hp. Twin Cylinder Lister Diesel Engine Runningby honestjohnnfld5,587 views
- 6:46
Julian shows us Daisy the Diesel, the way he sees it. Pt 1by bendy20001,105 views
- 0:39
Army Lister JP3 Generatorby armyinter18,314 views
- 0:36
Listeroid Startupby MrGerryButler697 views
- 13:08
DIESEL ENGINE GOVERNORS - PART 1by PublicResourceOrg5,527 views
- 4:03
lovson listeroid by D.S.ELECTRIC,S.A (updated)by dionicissanchez990 views
- 1:04
Slow speed Lister Diesel engine now watercooled 2by dm8mm2,618 views
- 0:44
650 RPM Diesel Generatorby sirjerryj5,013 views
- 5:46
Julian shows us Daisy the Diesel, the way he sees it. Pt 2by bendy20002,974 views
- 0:44
Changfa Chinese Diesel 5 Horsepowerby hemi505102,405 views
- 1:07
12/2 Field Marshal Diesel Listeriodby tnorvold7,545 views
- 1:13
Slow Idle Contest Entryby SmallEngineMechanic14,599 views
- 0:36
Lister CS diesel 3HPby spacehog19782,086 views
I like the rubber band between the cam follwers :-)
There are no clones I know of that don't need the bottoms squared. Don't be fooled when the exhaust rotates, It has far more lift and duration, they'll both run out too far if you put a dial gauge on them. JKsons are generally good machines.
georgeutterpower 1 year ago
Hi George. The cam followers were the one thing I needed to fix on this engine from new. When the rubber band trick failed to encourage the inlet lifter to come good, it was a simple fix to remove it and face it, then polish it up. After that, it has never been a worry. The quality control on the rest of the engine was excellent. Now that Steve Hutson at OzlisteroidsDotCom carries so many spares for these engines here in Australia, I'm sure even my sons kids will be generating power with it!
bendy2000 1 year ago