Supercharged Ranger
Uploader Comments (LeetErnie88)
All Comments (27)
-
Tom morona (I think that's how you spell it, correct me if I'm wrong) makes an intake to accept an eaton m90.
-
@fordmoparguy I did I had a 3.0L 2000 ford ranger I swapped it for a 5.0L out of an explorer but i found out that the water pump gasket was leaking I replaced that and the upper and lower radiator hoses plus thermostat it fixed the problem but after I did all that the motor started knocking so I put a V8 in it The 3.0's have a lot of problems
-
Woot! Ok gotta get one for my 2010 !
-
is this a 4.0 v6?
-
A donor Ranger.
-
Nothing you can do but change out the engine. its a different motor. yours is a push rod engine.
-
Quick question, i have a 94 ranger with a OHV 4.0 And i want to put the SOHC 4.0 in it what all do i need to do it?
-
hey everyone i just got a 93 ford ranger xlt it's a 2.3 i-4 and i was wandering if there was a supercharger or turbocharger kit for that year model truck i'd like to know so if anyone knows anything i'd like to know....thanks
-
HELP I WANT SUPER FOR 3.0LITER
-
has any one had problems with there 3.0 leaking coolant ?mine is
any problems with your transmission or engine internals? how many miles on the truck?
bluX69 4 years ago
Long story short. 9000 miles on the motor and stock tranny. 3 driver sides pistons blew shortly after the tune because they were preveously weakened from spark knock since the maf was not wired correctly for the longest time. I couldnt find anyone that could wire it correctly. Untill the damage was already done
LeetErnie88 4 years ago
With the M90 at 5psi it moves more air than the m62 express kit. I was making more power. I 5psi is the max i would push the stock motor with an m90 without arp head studs and lower compression pistons.
LeetErnie88 4 years ago
Dont find out the hard way. The stock tranny i beleive can hold up to 270wrhp with some sort of additive and shift firmness increased. Such as lube gard. Prevents the tranny from flaring between shifts and torque converter shutter. My motor is being rebuilt and should be done by the end of the month. Built to last and withhold the m90 power. The tranny will be getting some upgrades to withstand the power also
LeetErnie88 4 years ago
another question.
what other upgrades did you put on your ranger?
cyro8 4 years ago
I put a 2.9" pulley on. I would not recommend any smaller with out having ARP Headstuds. You should have at least water meth if you want to go higher in psi. I have 39lb 03 cobra injectors, 85mm p-mas maf, jba shorty headers, true dual exhaust no cats with flowmasters. I also did have a kenne bell boost a pump but i didnt need it. If you do true dual make sure you have an h pipe or x pipe put in.
LeetErnie88 4 years ago