Modded TBI 93 K1500
Loading...
Uploader Comments (78pacervette)
All Comments (37)
-
@78pacervette well see mines a 95 and the wire going to the injectors are black and brown an also mine sprays both injectors at the same time is it ok?
-
whats the pattern inside your throttle body spacer? im looking into getting one.
-
@78pacervette actually they always alternate. they just alternate in much faster patterns. beauty of having a computer is they can process much faster than our eyes can see.
-
@9c1chevy I have an 83 with a 383,ported Vortecs with 2.05/1.60 valves, Reed Custom grind roller cam, Doug thorley Tri-Y headers, Edelbrock TPI base, SLP TPI runners that have been siamesed, ported plenum, 3,400 Yank stall in a 4L60E, and 4.56 gears all running on 2001 LS1 0411 PCM running a modified 2001 Express L31 350 calibration. It sure is fun taking people by suprise with an old G-van.
-
Did you feel a noticeable difference after the mods?
I had an 89 s10 blazer with the 2.8 TBI. Soon after I got it I installed a throttle body off a 350 and stuck my 2.8inj/reg on it and it ran like a champ, but then I sold it.
I now have a 94 s10 blazer with a vortec 4.3
I'd like to build a TBI motor though, since I always had the best luck with them when it came to reliability
-
@YoungerPrice Youre an idiot...these a pulsed off and on...they are operating just perfectly...they actually pulse so fast it looks like its solid...
1:08
91 TBI 350 Engine 101091.MODby Justchevytrucks9,725 views- 0:49
Free Ultimate TBI Modby 403Vandweller2,359 views
- 3:40
tbi modsby canadianfusion10,846 views
- 3:04
TBI 220 Fuel pressure regulator change 2by ghtowagon4,641 views
- 2:16
1990 K-5 BLAZER-5.7 TBI SPACER INSTALLEDby bigpaw643,630 views
- 6:42
Chevrolet 1995 Z71 Silverado K1500 350 Cold Start and Walk Aroundby JetForceF2223,573 views
- 0:20
Chevy 5.7 TBI fuel sprayby 4carbcorvair19,345 views
- 6:56
Throttle Body Injectionby walshmonster20053,260 views
- 0:49
CHEVY 350 TBIby srsj41013,740 views
- 0:27
1989 Chevy K1500 350 5 speed 0-60by tgredneck24,539 views
- 13:56
How To Remove And Clean A Throttle Bodyby BIGSHAGGYDOGG23,707 views
- 0:15
tbi 350 throttle body with lid flipby canadianfusion7,796 views
- 0:36
1991 Chevy 350 tbi Super 44 flowmasterby mattmc839146,035 views
- 1:11
DIY Fuel injectors cleaningby coas21380,167 views
- 0:21
350 TBI startupby Fast3558,204 views
- 2:11
Changing IAC valve on your car. Idle Control. Its easy! TBI 305by ghtowagon8,989 views
- 0:31
Holley Commander 950 TBI Setup For Saleby firstjohn267,958 views
- 3:46
GMC Sierra Before and Afterby jtwolfe2510,375 views
- 5:32
C1500, C2500, C35, C3500, K1500, K2500, K3500, Suburban, Yukon, Tahoe 5.0L, 5.7L Intake Installationby KNfilters6,997 views
- 1:22
EGR valve testingby piecez061388228,094 views
Plz reply what did u do to get that spray pattern and does it help any?
Greenmonoluche 3 months ago
@Greenmonoluche
That is what it should look like if everything is working properly. Even on a stock setup.
78pacervette 3 months ago
looks like your injectors are clogged or something cus they shut off and on they should stay steady.
YoungerPrice 11 months ago
@YoungerPrice They are just fine when at idle they will alternate when it is revved up they dont shut on and off. If the injector was clogged you would not have a good spray pattern like you see in the video.
78pacervette 11 months ago
Did you have any clearance problems with the fuel inlets on the back after adding the injector pod spacer?
RockstarATG 1 year ago
@RockstarATG
Yes, you will have to grind the casting a little bit or the fitting will hit on it.
78pacervette 1 year ago