Format 67/ Top Gear video effect in Sony Vegas Pro 8 (Tutorial)

1. In "Video FX" under the "Color corrector tab" Add the color corrector "reset to none" (We are going to be adjusting it in a minute) Now with it added to your video, set the setting as follows:

Saturation to "1.164"
Gain to "1.164"
Gamma to "1.000"
Offset to "-18.6"

2. Next we are going to add another effect. In "Video FX" under the "Light Rays" tab add "reset to none" (we are going to adjust this one as well). Now that you've added it to your video, set the settings as follows:

Sensitivity to "1.000"
Strength to "0.000"

Radius X to "0.792"
Radius Y to "0.683"
Feather to "0.644"

Blend to "0.633"
Noise to "0.000"

3. Now for the last effect. In "Video FX" under the "Gradient Map" tab add "reset to none" (you probably know what comes next by now :P) Set the settings as follows:

Amount to "0.8120"
Mode set to "Blend"

Now the gradient map part you will have to refer to the video for, as it has no settings you can "type in" you just have to adjust the "0" "1" and"2" until it looks correct. For mine I have the 0 as far as it can go to the left, the "1" just barely to the right of the "0", it is actually touching the "0". And finally the 2 is a little more than three quarters to the right (just past where it turns completely white in the gradient).


Just a final note, these settings are just suggestions, They just happen to be the settings I used for this exact effect and I listed them out to make it super easy to do it on your own. However, feel free to change the settings around a bit until you get it to your liking!

Category:

Autos & Vehicles

Tags:

• Project
• 67
• Video
• effect
• sony
• vegas
• pro
• top
• gear
• tutorial
• srt-4

[123dmx321]

Is it for vegas pro 10 too ?

[95TurboSol]

@123dmx321 This was made with pro 8 but should work in 10 as well.

[MiscVideos100]

keep them coming..love learning from your videos. just great

[95TurboSol]

@MiscVideos100

Thanks, brother. I plan to do some on text and the protype titler in the future and may start narrating them so it is easier to follow.

-Matt

[TasteForDisaster]

how do i make the edges of the video black and getting more transparent into the video?

[95TurboSol]

@TasteForDisaster

It's in the description. Under "light rays" you just add the one that says "reset to none" effect to your video and then adjust it by selecting "bound radius" and sliding the radius x, radius y and feather until it looks the way you want it too.

-Matt

[uire]

Dodge SRT-4 :)

[fordmondeo979]

nice, thanks :)

[pokegirl4581]

....

[95TurboSol]

@emotion333

No problem, hope it helps :)