HPI MT2 Mostly Alloy

This is my HPI MT2 Project. Nearly finished just needs the Steering alloy and radio support. I use this at the track and most times on an empty Field or Car park. This nitro car has never had a crash and never will because its my pride and joy. it has ran away before (servo horn popped off) but it was at the track and it rolled over so i jumped on it and cut it off.

HPI MT2 UPGRADES SO FAR!

HARDEND STEEL SPUR GEAR 52T
14T CLUTCH BELL (13T CLUTCH BELL SPARE)
ALLOY FRONT & REAR KNUCKLE ARMS
ALLOY RADIO DECK WITH POST
ALLOY FUEL TANK CAP
ALLOY FRONT & REAR SHOCK TOWERS
ALLOY FRONT & REAR LOWER ARMS
ALLOY DRIVE ADAPTERS
ALLOY BALL BEARING FRONT C-HUB 8 DEG
ALLOY FRONT SUSPENTION
ALLOY TIE RODS INC STEERING

FUEL & GAS FILTERS
6 SPOKE HPI WHEELS #3086
TRACK SPIKE TIRES
GRAPHITE BRAKE DISK #GNMT2039L
6V 1400MAH HUMP PACK
FAIL SAFE
.15 CXP ENGINE
HARDEND DIFFS
TUNED PIPE AND HEADER
13kg High Torque Steering servo
High Torque Throttle and Brake servo
2.4GHZ Radio Equipment - FS GT2 (Brill Piece of kit most people laff at it but it beats many high end radios at the track)

Category:

Nonprofits & Activism

Tags:

• Alloy
• HPI
• MT2

[wildcardjoker]

on the engine you have 4 zip ties thru pieces of fuel lines.whats that for.i noticed if glow plug touches engine servos jump but was wandering what the purpose is.thanks

[danielking46]

@wildcardjoker The Zip Ties in the engine are to protect the head of the engine when it rolls over. stops scratches :)

[MrTiti989]

Wow your a fck dumbass do you know that if you put too much alloy its worst because nothing on the truck can bend so all youve done is wasting money

[10stephenbennett]

Hi.Where did you get these part and can you order them and if you can where

[alexisdabest1]

hi, im from rc nitro talk forum :) i subbed u