One Piece Neck Build Part 1: Introduction
Loading...
Loading...
11,285
Loading...
Uploader Comments (Bobo9977)
see all
All Comments (5)
-
Bill, if you wanted to modify your plans so that you could make guitar OR bass necks, would you just 'stretch out' the middle section of the plan by the extra length that a bass neck would require?
-
what are the diomensions that you use
Loading...
2:33
One Piece Neck Build Part 2: final oultineby Bobo997717,082 views- 8:57
One Piece Neck Build Part 3: Trussrod Channelby Bobo997725,247 views
- 10:05
One Piece Neck Build Part 7b: Compound Radius Fingerbaordby Bobo997717,379 views
- 1:23
Fingerboard radius sanding jigby Bobo997715,855 views
- 9:02
Carving a maple top PT 1of2by treaderbass15,991 views
- 5:44
Scalloped Fretboard for electric blues guitar. Part 2.by stringrip33,062 views
- 7:22
Build a 59 part 3Bby A1373S986549,017 views
- 7:42
One Piece Neck Build Part 8: Adding position markersby Bobo99776,167 views
- 2:31
Guitar Neck Building-Five Piece Neck-Thru Guitar Part #1by markxkovacic12,373 views
- 2:02
Custom flamed maple Strat Neckby Bobo99774,865 views
- 1:03
Neck Radius Router Jigby Vandebilt12,301 views
- 5:54
Ryan Martin's Neck Carving Jig.by TheRealRyanMartin31,660 views
- 2:00
Kit Telecaster Build Part 1by Stratboy99911,563 views
- 10:54
One Piece Neck Build Part 10: Body machining and prepby Bobo99773,882 views
- 3:32
Truss Rod Installation and Fingerboard Glueup - Wood Shop - Neck Teamby PaulReedSmithGtrs30,037 views
- 5:48
Handcarved guitar neckby wcswood35,462 views
- 8:43
make a trussrod.wmvby Bobo99771,596 views
- 2:56
building telecaster #1by weekendguitarbuilder22,160 views
- 9:40
How to build a electric guitar Part 6by HearGear5,568 views
- 1:05
Neck radius routing jigby Meulmeester176,069 views
You say a telecaster neck, but will this series apply to any type of neck?
I'm going to watch them all as they will surely be interesting.
Thanks
Sitheplayer 1 year ago
@Sitheplayer
It should work, although there may be some tweaking necessary.
It will do strat necks but you may need to widen the baseplate opening to accomodate the larger headstock. It should also work for angle headstocks with adjustments.
Bill
Bobo9977 1 year ago
@Sitheplayer
I forgot to mention that you can do an angle headstock neck if you wait to glue the headstock and heel block after you contour the back, then you can use the jig as is.
Bill
Bobo9977 1 year ago