This video is unlisted. Only those with the link can see it. Learn more
Interactive Hunteering Bear 4b
Loading...
1,227
Uploader Comments (phantomTMA)
Top Comments
-
nice, when you see the bb cut the grass!! :P
2 damn adictive!!
see all
All Comments (10)
-
thout we missed him at first haha
-
You're a star Phantom. thanks for your help!!!
-
So far so good :) Great idea phantom!
Loading...
Ok, thankyou, do you know how long it would roughly last me, basically I don't do airsoft really often but would like to have a good sniper which doesn't cost me loads. Thanks for your help phantom!
Milesy1818 1 year ago
It should last several thousand shots before the sears need replacing (no longer cocks). Remember to lightly grease the spring/guide and inside of the cyclinder. Do not grease the piston or cylinder head. Silicone lube the rubber o ring. Use abit more grease on the outside of the cyclinder to aid cocking action.
Hope that helps.
Good Hunting ;)
phantomTMA 1 year ago
@phantomTMA Hi Phantom, I'd like to buy a TM VSR10, what upgrades are recommended which don't stretch the budget for it to be firing at 450fps with 0.2g accurately.. Thanks
Milesy1818 1 year ago
@Milesy1818 Buy a 130 spring (the original sears should last a while) and a spring guide with piston would be sensible (the original ones are only nylon). Your spring guide stopper may bend after a while and drop out now and again (making the gun need stripping). If this happens, make a block to stop it dropping down into the trigger mech.
phantomTMA 1 year ago
You may struggle to get enough hop for maximum range with heavier pellets. I found a firefly hard VSR bucking gave good range in my BAR10 with 0.30g. Use a couple of layers of some teflon tape to seal the rubber onto the inner barrel.
Use any 0.30g ammo if you are on a budget.
Good Hunting ;)
phantomTMA 1 year ago