Parkzone P51 gunfighter Mustang Flap and landing gear mod
Loading...
Uploader Comments (sngdesign)
All Comments (15)
-
those gear's looked tough in your video. nice work. would like to see how and where you installed them. you bounced like 5 feet in the air and it looked like the plane did not mind at all.
-
Cheers, I think I'll go ahead with them now, thanks.
-
what do u need to make flapsi am guess 2 SV80 Long Lead 3-wire servo and a Y harness and Flaps kit by parkzone or did u use the Pushrods with Clevis: P-51D Mustang BL by ParkZone can u make a video on how u did it!
-
i have to be true. i got a messerschmitt Bf-109G from parkzone. i havent flown her yet. shit weather
-
Retract is my next step. I just couldn't find a good one. I want it to be strong, light and cheap. Perfect combination!
-
You could do it in theory. Just link the retract servo w/ your flaps servo. Only problem is you have little control of the min and max of your gear. I have a 5e also, should have spend a bit more to get the 6e. I'm sure it will work but it might take some time to fine tune.
0:26
Parkzone P-51 gunfighter 111 mph radar passby noxqses7411,479 views- 2:38
Parkzone Mustang Gunfighter Landing Gear Slideshowby Iliumair6,864 views
- 0:09
Parkzone p-51 mustang flaps and retracts modby 1975kross14,604 views
- 3:17
Parkzone P-51D BL Landing Gear Additionby sparkie9515,878 views
- 2:01
Parkzone P51D Mustangby HorizonHobbyGB49,480 views
- 8:19
P-51 Gunfighter Acro Demo Offut AFBby B25Flyer3,442 views
- 0:38
P-51D Mustang Parkzone microby pavlos1471,488 views
- 2:50
Parkzone Corsair: First Flight & Crashby fresbill41,859 views
- 2:06
ParkZone P-51D Mustangby HobbyHangarNZ12,822 views
- 1:27
ParkZone P-51 Gunfighter, windyby grimace3082,527 views
- 2:55
FMS P-51D Mustang Flap Mod and Final Retract Setups 01-26-2010.wmvby guapoman20005,666 views
- 3:02
Parkzone P51by machine821,162 views
- 9:55
Valere's Foamie flightsby rickydou3,548 views
- 2:06
ParkZone P-51D Mustang BLby SquadronLeaderUK4,257 views
- 1:06
P-51 Mustang Flaps 1450mm FMS - www.ready2fly.euby ready2flych20,063 views
- 2:26
Haiduk's Parkzone P51 (w/Rimfire .10)by Duk671,000 views
- 1:50
ParkZone P 51 GunFighter Brushless BNFby tkrahlin2,572 views
- 1:00
Parkzone Mustang P-51 BL Custom Color Retractsby mazdabaumann1,614 views
- 2:33
Parkzone P-51 bl with Turnigy 35-36c motor upgradeby robjinhouston8,695 views
Hey again, how did your esc/bec handel 6 servos? I am running a 25amp esc and in testing she spazed right out when when I hocked up the 6th servo. Will I need a Ubec? Many thanks, Goob.
FlyingGoober 1 year ago
@FlyingGoober Im running a SportBEC Switch-mode BEC 5.0V / 6.0V $29 from Graysonhobby, no more problem w/ over draw of my battery. Battery safe protection. A must have if you are running lots of servos.
sngdesign 1 year ago
Hey there, I am thinking of putting flaps on my p51, did you have to strengthen the main wing as you cut say 1/5th into it, or have you found the wing stong enough.
cheers
FlyingGoober 1 year ago
@FlyingGoober They're pretty strong. I dont have to do anything else to them. Although it wouldn't be a bad idea. I also consider just adding flaps w/o cutting them, like a duck bill kinda flips found in some WWII planes.
sngdesign 1 year ago