Tech Tip - Installing 06 STI Header : Rocksliderally.com
Loading...
Uploader Comments (rally411tv)
Top Comments
-
If this video were made by expertVillage it would have taken at heast 55 videos!
2 years ago 13
All Comments (49)
-
@rally411tv Do you have to lift up the engine?? I was going to install a new gasket for my uppipe > header gasket (as well as removing my headers, and replacing the ones for the engine) Thanks!
-
u left out that the gaskets are directional, (round edge, sharp edge "at least the OEM ones are!)
a little anti-seize on the studs on the heads will make the sliding of the header on so much smoother,
too much anti-seize on the a/f sensor, it may affect the reading.
Otherwise Well Done on the write up video!!
-
@chrism6 your an idiot
-
Hey lol can you install headers onto a ej18 that are for an ej20 engine??? jw.
-
so you secure that side with one nut, huh? sounds pretty hard when the car is that high up! lol
-
@ColeFilth research man it will do you a lot of good haha lol jk exhaust manifold bottom of you moter/ engine what ever you prefer.
-
How is that a stupid comment? If you guys knew subaru's like you say, you'd know that both those items are required for maximum performance and less lag. Nothing worse than cold headers for turbo spool. And the splitter makes a massive difference.
- 2:14
Installing Aftermarket Headers Step 3by teamprojectzero21,385 views
- 7:38
road race 08+ header installby roadracemotorsports114,939 views
- 1:04
subaru impreza equal length headersby smallpaul1234,382 views
- 1:14
Installing Aftermarket Headers Removing The Stock Headersby teamprojectzero7,961 views
- 0:27
WRX with equal length headersby scooterforever68,469 views
- 9:45
Redneck Repairman Installing Headers into A 1990 4x4 chevy Pickup Truck Part 2by wriske111,339 views
- 9:51
How to install a turbo?by turboshoetturbos73,977 views
- 7:55
Exhaust manifold, parts removed, headers before/after etc.by photographermatt16,922 views
- 0:30
Installing Aftermarket Headers Step 2by teamprojectzero10,452 views
- 5:41
ATV How-to: Installing header wrapby 55quadboy15,012 views
- 4:50
06 Subaru WRX STI, GT35R rotated turbo, boosting!by JimmyDShea75,055 views
- 9:59
8th gen civic header install part 2by hollatip0079,903 views
- 0:43
sti with headersby 07BLUESTI14,533 views
- 0:25
06 wrx pull offby RTree61325,885 views
- 1:59
Oil catch can on Subaru Impreza wrx sti tutorialby WrXsTi4EvA29,079 views
- 5:19
STi stock header vs Perrin Header compareby TurboQueaf6,740 views
- 0:44
How To Install Aftermarket Headers With Dr. Hersheyby teamprojectzero4,793 views
- 2:36
install Lt's headers at home camaro ls1by thels1na12,257 views
- 0:40
Installing Aftermarket Headers Step 1 Part 1by teamprojectzero4,493 views
- 4:30
2003 Altima 2.5S Precat Removal Header Installby barkingelectron38,264 views
is there a reason why the engine is being slightly hoisted by the oil pan?
KillerZero259 3 months ago
@KillerZero259 yes, as long as your not pushing it up really high its fine. ALL i mean ALL professionals do that. Paul has been working on Subarus for a very long time. The reason you hear not to lift by the oil pan is most backyard mechanics do it too far and dent the pan.
rally411tv 3 months ago
Theres no heat wrap on the headers, and the dump pipe you installed did not have a splitter for the turbo. EPIC FAIL.
chrism6 8 months ago
@chrism6 sir that is a stupid comment.
rally411tv 8 months ago 6
What's the reason of headers after the turbo?
lancerevogolfmk1 1 year ago
Better flow through the intake and exhaust allows more power. That includes the entire exhaust system.
rally411tv 1 year ago