Parkerizing and Duracoat Part 1- Sandblasting
Loading...
Uploader Comments (Iraqveteran8888)
All Comments (36)
-
I have heard nothing but negative comments about blasting with play sand.
-
Dude, gotta say you are awesome for tutorial vids man. All your projects are done with outstanding quality. Keep it up
-
@ESGCmfr87 depends on how many colors and if you are going to use a premade pattern from lauer. The quick kit is 29.95 for one color with everything you need. Any other stuff, like blasting, will cost you for the compressor setup and the media. It's pretty simple stuff, just follow the directions and the videos that people post. Get creative with painters tape if you want to do a pattern.
-
put a vent on oppsite side of vac so it clears it faster
-
if it wasent so bad you could probly use navel jelly to
-
does the media just gtet recycled or do you have to refill it each time?
-
How much would it cost to duracoat a mosin nagant sporter
-
do you have to sand blast even if the metal isnt rusted
10:00
Parkerizing and Duracoat Part 3- Duracoatingby Iraqveteran888832,422 views- 6:30
Spanish Mauser #2- Finished Product, Duracoat and stock workby Iraqveteran888863,221 views
- 18:50
The basics of Manganese Phosphating (Parkerizing) in HDby Iraqveteran888824,261 views
- 1:35
Redneck Prideby warrior4126,287,371 views
- 1:57
The "Japanese Garand" WWII semi-auto rifle.by NFMCurator120,465 views
- 1:30
How to Jewel a Rifle Boltby MidwayUSA92,312 views
- 5:35
The Best Digital Camo Tutorialby EKruse11310,957 views
- 13:54
Duracoat Firearm Coating part 1by beast1210115,798 views
- 0:34
Mosin-Nagant 10-round magazine- feed test 1by TheDatamancer86,911 views
- 7:17
Rock Island Armory Tactical DuraCoat M1911-A1by gunskniveswatches15,724 views
- 5:04
DuraCoat Shake 'N Spray Finishing Kitby LCWDuraCoat50,568 views
- 3:08
AGI PKV Parkerizingby AmericanGunsmith20,314 views
- 1:59
Cleaned Up 1941 German Mauser K98by ericzanutto22,330 views
- 5:52
DuraCoat Finished Product: Remington 700Pby nutnfancy253,700 views
- 15:00
Duracoat basics & tips. Long look at prep and supplies.by TheTactical6string11,970 views
- 1:26
Wet Sandblasting - Water Sandblasting - PressureJetby pressurejet1177,731 views
- 7:06
"Part 4- Applying the Tru-oil and buffing to the desired finish" Stock Refinishingby Iraqveteran8888142,338 views
- 3:01
Gun Drilling Machine Deep Hole Drilling Machine Professional manufacturer in Taiwanby videonash0173,749 views
- 3:16
My 1st Dura Coat attempt on my Rem 870 Expressby UltraXryder13,160 views
Have you ever used glass beads for media blasting? I was just wondering if it would work better or not.
DdgeluvinHic 1 year ago
@DdgeluvinHic Glass beads produce a very nice satin appearance but aren't always the best choice. You want to score the surface a good bit for rust bluing or parking.
Iraqveteran8888 1 year ago
Have you thought about using durafil for the pitting?
TheMedievalMan 2 years ago
I haven't experimented with any of that yet. I had used a bead of weld to fill in deep pits before to decent effect. I has to be a very deep pit though.
Iraqveteran8888 2 years ago
What PSI are you blasting at? 90 - 100 or could you do something like 60-70 psi for general surface prep? Do you find that regular sand works just as good as 120 grit AO? I may try using one of those portable abrasive blasters from Harbor Freight.
MJDGator 2 years ago
Generaly surface prep could do well at around 80 PSI, but I run ,mine at 100-120 with good results.
The AO is far better for metal prep in firearms. Be sure to get all of it off after you are done though. The stuff will creep into the smallest placees, and you must completely disassemble all parts before using AO.
Iraqveteran8888 2 years ago