FSX Singapore Airlines 744 Landings
Uploader Comments (andrewmsj)
All Comments (27)
-
Touch down with main wheels was smooth, but you hit front wheel a little hard.
-
ughh ok ur gay
-
great landings!!
-
MFSX??;P
-
your landing is alright but if you want a more smooth landing, put your engines to idle just/after you touch down either 1, if is after touch down your speed have to be a good speed and once you touch down put it to idle and put your nose wheel down engage reverse thrust and brakes, if just before touch down, come in at abit faster speed so after when you put your engines to idle you still can flare and not stalling up the plane then the plane with kiss the gound with a smile on your face=)
-
awesome
-
wow nice
-
Well as I can see you did it well, but when you landed it it had to be faster.
-
nice
-
very smooth, but you were at first too low but you were dropping down slow so it was ok at final a bit then too high but good, very good, 5*
Hi,
the PAPI must be 2 red and 2 whit to be on the glideslope correct... and then you should go more slow, in real life real flight the landing gear would c has collapsed ... And this is important in real life you mustn't set the reverse if the front landing gear hasn't touched the ground... First the front landing gear must touch the ground (the runway) and then you put the reverse (thrust rever)... However good landing but you can be excellent byebye
WilliamTheBest16 2 years ago
haha
andrewmsj 2 years ago
how do you get that kind of plane i have fsx i dont have that kind
gurbet536 3 years ago
avsim . com
andrewmsj 3 years ago
Your coming in VERY low which is why your going so far down the runway. Those red/white lights on the side should have 2red and 2 white when your on the glideslope correctly. Also, another reason your going so far down is your speed, beacuse your so low you need to go a lot faster then your supposed to. Approach speed in the 747 is around 140kts, come in higher and hit that speed, and you should be fine.
unmanedpilot 3 years ago
haha
andrewmsj 3 years ago