How To Build An EM Pump

This is a basic tutorial on how to build a small portable EM pump. EM Pumps are said to attract and strengthen paranormal entities and activity, as well as improve EVPs. This is a simple design and if you're used to soldering wires, you can make this. It's the same basic unit as the Ghost Bait GB-1 that I sell on Ebay. This is just my way of giving back and saying "Thank You" to the community that has helped and supported me so much. I hope you find it useful and feel free to post here or contact me at www.CoParaTech.com if you have any questions. Be safe and Happy Hunting! Copyright 2011 Colorado Para-Tech. All rights reserved. Royalty free music, "Blue Sizzle" by Kevin MacLeod, is used by permission of Creative Commons license and available at www.incompetech.com.

Category:

Science & Technology

Tags:

• EMF
• EM Pump
• em
• EVP
• ghost hunting
• paranormal
• ghost
• spirit
• haunted
• device
• ghost hunting equipment

[pblinds]

How do you keep the unit it self from vibrating all over the table???

[Renarts01]

@pblinds First, try to get the magnet as straight as possible when attaching it to the motor. The more crooked or off center it is, the more vibration it will cause. Another thing that helps is to attach some foam rubber on the bottom of the case to absorb vibration.

[valeofsecrecy]

Hey i used Ceramic ring magnets, will they work the same as the Earth magnets?

[Renarts01]

@valeofsecrecy Rare earth magnets have an extremely dense magnetic field so they give off a larger field when spinning. That's really the only difference. Ceramics will work fine.

[armyveteran1000]

Rich, I'm waiting for the tray motors to come in the mail any day now. Just wondering if it makes any difference whether the motors are mounted verticle or horizontal to get the best EMF field?

[Renarts01]

@armyveteran1000 The wave dispersion pattern seems to be oval shaped so a horizontal mounting like the one in the video will give a better vertical output. Of course you can also change the orientation of the box when using it and try it different ways to get the dispersion you prefer.

[valeofsecrecy]

WOW, i just finally got to test it with an EMF reader, I got no closer then 4 or 5 feet literally and it pegged the meter lol. Its putting off some serious EMF! Thanks again for posting the instructions. I have a few ideas to boost the EMF even more, i'll let you know if it works!!!!

[armyveteran1000]

Rich, I seen some of the DVD tray motors made by Hitachi, Samsung and Microsoft all saying for XBox 360. Which is recommended better, and what size box did you use in this video. Thanks again, Rich

[Renarts01]

@armyveteran1000 Hi Rich, The size of the magnet really depends on the size box you use and the motor position. For this video I used a 1/2 inch diameter magnet. I have built a few 2 motor units, but we use the single motor units more.

[armyveteran1000]

Hey Rich, Just wondering what size should the earth magnet be and have you ever built an EM pump with 2 motors? Rich,, NJ Ghost Organization.