How To Make a Camcorder Stabilizer

Expand the description and view the text of the steps for this how-to video.

Check out Howcast for other do-it-yourself videos from carlo_scialla and more videos in the Film Production category.

You can contribute too! Create your own DIY guide at http://www.howcast.com/videos/new or produce your own Howcast spots with the Howcast Filmmakers Program at http://www.howcast.com/filmmakers/apply.

If shaky home videos are making your audience seasick, it's time to steady your hand.

To complete this How-To you will need:

PVC pipe 1 1/2 to 2 1/2" in diameter
6 6-inch pieces
2 3-inch pieces
4 2 1/2-inch pieces
And 3 1 1/2-inch pieces
10 45-degree elbow connectors
2 PVC T-connectors
A four-way cross connector
A can of PVC cement
A PVC end cap
A drill with a 1/4-inch bit
A 1/4-inch carriage bolt, about 4" long
A 1/4-inch nut
A 1/4-inch wing nut
A 1/4-inch fender washer
A camcorder
Black spray paint
Grip tape

Step 1: Begin building bottom

Attach two 45-degree elbow connectors to either end of a 6-inch PVC pipe. This will be the bottom of your camcorder stabilizer.

Step 2: Attach T-connector

Add a piece of 2½-inch PVC pipe to each connector's open end and then attach a T-connector to both.

Step 3: Connect PVC to cross

Separately, affix the two 3-inch pieces of PVC to opposite ends of the four-way cross connector. Attach an elbow to the open end of each 3-inch piece. This assembly will serve as your camera's base.

Step 4: Link Ts to elbows

Attach the two assemblies you've built so far by attaching the elbows to two 1½-inch PVC pieces, and those pieces to the inward-facing holes in the T-connectors.

Step 5: Add remaining PVC pipe pieces

Add the remaining two 2½-inch PVC pipe pieces to the open holes on each T-connector, and attach elbow connectors to the pipes.

Step 6: Connect side pipes

Attach a pair of 6-inch PVC pipes to the open ends of the elbow connectors. Attach elbow connectors to their open ends.

Step 7: Build top

Now build the top of the stabilizer. Attach a pair of elbow connectors to either end of a 6-inch PVC pipe. Then, attach the two remaining unused 6-inch pieces to the other ends of the elbow connectors.

Step 8: Attach top piece

Connect the elbow connectors on the top pieces of your stabilizer to both 6-inch side pieces, forming an octagon and completing your basic frame.

Step 9: Seal with cement

Seal all the connections on your stabilizer by brushing on PVC cement, and let dry.

Tip: Spray-paint your stabilizer black to make it look sleeker.

Step 10: Drill hole in end cap

Create the camera mount. To begin, drill a hole the size of the bolt through the center of a PVC end cap.

Step 11: Thread bolt in cap

Thread the carriage bolt through the underside of the cap so it pokes through the top of the cap. Screw the nut down the bolt until it meets the cap, holding the bolt in place.

Step 12: Connect PVC to cap

Attach the underside of the cap to the remaining 1½-inch piece of PVC and cement them together. Let them dry.

Step 13: Attach wing nut and washer

Screw the wing nut onto the top of the bolt and add the washer.

Step 14: Screw in camcorder

Screw the bolt into the camcorder's bottom tripod hole and tighten the wing nut.

Tip: For easier handling, apply grip tape to the two side bars of your stabilizer.

Step 15: Attach camera mount to rig

Once your camera is secured to the bolt, attach the assembled mount to the top of the cross connector in the center of your rig and cement the connecting PVC. You're ready to start recording, one steady shot at a time!

Thanks for watching How To Make a Camcorder Stabilizer! If you enjoyed this video subscribe to the Howcast YouTube channel! http://www.youtube.com/subscription_center?add_user=howcast

Category:

Science & Technology

Tags:

• HotHowTos
• arts
• media
• film
• making
• movies
• FILMING
• constructing
• camcorder
• stabilizer
• stable

[NtlgntNrg]

I think tripod is for "still" videos and panning, but if you want to carry the camera around, for example, follow a running kid then you will need a camera stabilizer. There are different kinds and shapes of stabilizers.

[TheApeman13579]

Or you can just build that

[adamkleinschmidt2003]

i already have a built in stabilizer on my vhs-c camcorder

[TheSwordt]

i think u like inches ^^

[avallonmist]

@averyaccordion My husband is making one for me now. He bought an 'old-fashioned' style steering wheel at ?? Auto-zone?? And, he's having a 1/4" hole drilled into the piece in the middle for the mount. [I guess he didn't really 'make' it, but...]. I don't need anything fancy, just something that will hold my camera still and !safe! when I'm climbing around the beach rocks :-). I'm glad yours has worked out for you; photography and videoography are very rewarding hobbies.

b/b)O(

[averyaccordion]

@avallonmist true, but it is almost as good. When you get lenses with lens shift and a CCMOS shift stabilisation, i can mount it on a go kart and it will be crystal clear, even in video. They are way high end, so for affordable cameras under $1000 it isnt practical.

I ended up making one of these, and it rules. I just cant mount it right... its not streight. BBut i can see the difference :)

[avallonmist]

@averyaccordion The stabilization feature on cameras leaves a lot to be desired. It's nicer than not having one; but it's still no match to a contraption like this :-)

b/b)O(

[averyaccordion]

ts cheaper to just buy a new camera with stabilization :)

[mrslowrawsquad]

0:01



[TeReNCePROductionZz]

how much would this whole thing cost?

[MrsPalmerTV]

I procrastinated for so long and finally ordered Cam Caddie and for roughly $40 my videos are 1000x better. I hihgly suggest it, the shots of my kids running with our dogs are priceless!