How to Build a Chest of Drawers : How to Attach the Finished Top of Chest of Drawers
Loading...
Top Comments
All Comments (12)
-
"I am a robot. I have a robot vagina."
-
@TheReconSquad it doesn't have to be giant. it was a small project you could just clamp the edges round or how bout those things called joints. or use biscuits. and out of curiosity show me a table, any table, made by marc(i watched most of his videos) where he uses a) just glue b) pin nails c) those two combined to secure a table surface.
i study architecture and for 2 semesters studied furniture. needless to say the technique showed above did not appeared.
-
Safety glasses???
-
Why not just screw it with a couple of screws from the underside?
-
damn john you missed a spot..add more glue!
-
This top will split and crack with the weather change. What a nitwit.
-
expert what???
-
Pause at 0:22 and you will see that the end grain of the top panel has been wrecked in the cutting. That isn't an acceptable standard of work, especially in a demonstration video. Also the glueing needs to be done better. The glue must be spread properly and pressure applied over the whole top surface, not just in the middle.
30 videosHow to Build a Chest of Drawers- 1:38
How to Build a Chest of Drawers : How to Assemble Drawers for a Chest of Drawersby expertvillage18,328 views
- 2:12
How to Build a Chest of Drawers : How to Attach Drawer Slides for a Chest of Drawersby expertvillage50,640 views
- 2:22
How to Build a Chest of Drawers : How to Attach the Front Trim for Chest of Drawersby expertvillage22,553 views
- 1:48
How to Build a Chest of Drawers : How to Install Bottom Piece of Chest of Drawersby expertvillage8,854 views
- 9:24
Original Woodworking Cabinet Plan & Design 3by WoodWindiy33,225 views
- 10:11
David Termini makes a custom cherry wood cabinet Part Bby watch4david34,494 views
- 4:15
Storage Chest Part 2: Attaching the Assemblies and Interiorby Lowes42,771 views
- 6:04
Making drawers for a pine chestby GetWoodworking56,490 views
- 3:48
quim barreirosby anfalz25,017,606 views
- 5:46
Shaker Chest of Drawers Building Process by Doucette and Wolfe Furniture Makers Shaker Dresserby doucetteandwolfe34,275 views
- 2:13
How to Build Upright Bookshelves : How to Apply Final Finish to Upright Bookshelfby expertvillage40,471 views
- 2:16
Kitchen Remodeling Ideas and Tips: Before You Call a Professionalby HowdiniGuru111,776 views
- 1:30
How to Build a Custom Computer Desk : How to Sand the Initial Cut for your Custom Oak Computer Deskby expertvillage12,934 views
- 1:00
How to Design & Build a Computer Desk : Installing a Keyboard Shelf on Computer Deskby expertvillage49,842 views
- 3:11
Junior Door Setsby wwgoaeditor30,066 views
- 0:57
Custom computer deskby kirche5477,277 views
- 2:04
Building an Accent Bench, Part 2: Slats, Base, Bottom Supportsby Lowes37,577 views
- 3:18
Home made Studio Deskby ICEMAN616able25,602 views
- 0:57
Building Doors (Intro)by FineWoodworking68,008 views
- 0:35
timber joint for a bedframeby slowwood44,298 views
just for the record this is crappy craftsmanship. a true woodworker never uses pin nails to hold the table top to the frame. also he sure as hell will never use a bucket to secure an on-going gluing process because he has heard by now of clamps
r4zv4nes 11 months ago 7
Nails in a fine furniture?
UnoPonce 3 months ago 5