How to replace the arm rest on a Technics sl1200
Loading...
Top Comments
All Comments (26)
-
ok my tone are has a little wist in play in it i can see a little screw undernith the arm i get to it to tighten it?? (please help) thank you so much!!!
-
xtn3+8b
-
Does anyone know the part number for the screw for the tone arm rest?
-
Also, to make things easier, lift the height adjustment as high as it will go. You'll have more room to work with...
-
Thanks a lot. Ordering replacements now...
-
hy, this comment is off topic but I hope you can help me ?! I would like to bye a Torq XPONENT and I would like you to do a demo video with this ! Excuz my english ?! Thank you !
-
Thanks. I just replaced two of them in 10 minutes. The most work was bending the screwdriver :/.
-
please man i need your help you know the 2 little black screws right behind the arm holder that hold the tone arm straight , i need to tighten mine
-
I need to know if my tone arm is bad. Only playing on one side
-
first of all you cant bend a screw driver. even a soft meatle would still snap at 90* I used the drill bit
3:51
How to fix replace Technics SL1200 tone arm Part 2by ellaskins26,649 views- 5:27
How to set the arm of a technics sl1200by ellaskins48,322 views
- 8:38
How to fix replace Technics SL1200 tone arm Part 1by ellaskins39,075 views
- 1:13
How to change the Target light on a Technics sl1200by ellaskins19,459 views
- 9:57
how to change the tone arm on a technics sl 1200/1210 turntable part 1by viperfrank28,463 views
- 1:51
How to replace the tone arm rest on a Technics SL1200 tutorialby XChristianNoirX8,556 views
- 6:24
How to service/repair/replace the height adjustment on a technics 1200/1210 MK 2 turntable part 2by viperfrank17,760 views
- 2:48
Does your Technics SL1200 arm still jump?by ellaskins23,679 views
- 3:16
DJ PRO LAB - Technics Tonearm Checkby djprolab29,102 views
- 1:49
Why doe's the styli needle jump on my 12"?by ellaskins14,308 views
- 7:53
SL-1200 TECHNICS PHONO GROUND WIRE REMOVAL (great for Serato) PT1by djnewk211,157 views
- 1:06
Technics 1200 - Clean The Dotsby tuneup120024,580 views
- 5:57
DJ Tutorial . The Wide feature Technics SL1200 video 3by ellaskins15,776 views
- 8:43
Self-Grounding a Technics 1200 Turntable, part 1by djbolivia15,132 views
- 4:48
Why you shouldn't buy a Technics SL-DZ1200by Glassball255,308 views
- 9:30
how to adjust the pitch range on a technics 1200/1210 MKIIby viperfrank21,295 views
- 0:57
How to get more weight on the end of the styliby ellaskins6,721 views
- 7:54
How to fix a dodgy connection on your turntables cartridge.by viperfrank15,855 views
- 2:47
Gold Technics SL1200 plays Summer Sambaby charline8089,576 views
- 9:50
fix tone arm bearings on technicsby DejayMelo7,461 views
Just to make things even easyer i suggest you go and buy a right angled screw driver. £2.00.
cheddarbob111 3 years ago 5
You can also use a 1" phillips "bit tip" used for cordless drills. I used a #1 size tip with some tape on the back (to hold it in place and prevent scratching). Turned with a crescent wrench.
ebencarlson 4 years ago 4