Custom Car Club Plates
Loading...
Loading...
2,620
Loading...
Uploader Comments (jdsprince)
see all
All Comments (6)
-
Ah ok - Just curious because I've been wanting to start metal melting/casting for a while now, would like to make my own foundry/etc but. idk not sure i have everything needed & exactly how to do it. I've watched quite a few vids tho & got most of it down, Im just not sure what to use as a crucible, & if i make it out of steel what all could i melt in it without the crucible melting. I've accumulated most of what i need, have prob 300+ lbs of casting plaster & oil to burn, some fire bricks.
-
to use the mold for cement or clay or ceramic? and that took time to heat all that aluminum?
-
I use a tie rod fork as a rapper to loosen the part from the sand. It works really well. :D
-
You're welcome.
Loading...
2:16
JCs Custom Paint / Swift Car Clubby WWEERROO21642,993 views- 1:23
home foundry, lost foam, cast aluminumby sfchild16,245 views
- 3:03
Vaccum former 2by kidcool582227,933 views
- 2:11
DIY Aluminium Casting experimentby emailspangy172,859 views
- 0:25
Custom Cast Aluminum Platesby jdsprince5,318 views
- 4:40
DIY Foundry: Demolding Foam+Petrobond Experimentby amaedesign5,409 views
- 3:58
Lost Foam Cast Aluminum Skull Castingby jdsprince36,965 views
- 0:26
8" Custom Cast Aluminum Hockey Theme Memorial Plaqueby jdsprince940 views
- 0:24
Custom Cast Aluminum Cadillac Gravesite Marker Plaqueby jdsprince3,601 views
- 2:05
$30 backyard aluminum foundryby Nuvious180,077 views
- 0:14
Can Crusherby jdsprince3,378 views
- 1:45
"Reverb" Aluminum Furnaceby Henryfreiburg2,739 views
- 1:01
Custom Cast Aluminum Plaque For The Chief Pontiac Trailby jdsprince2,792 views
- 0:38
Precision Airset Sand Casting for Aluminumby ArmstrongMold24,539 views
- 4:15
Metal Castingby HeathLedgersChemist4,086 views
- 38 videosCasting
- 2:50
Honda Chopper Project Video #32 CASTING COVER ARTWORKby berkelusa2,302 views
- 1:42
Honda Shadow Ace 750 Cast Aluminum Master Cylinder Coverby jdsprince79,970 views
- 9:37
MarksWorx Casting Session #4 More Lost Foam Castsby MarksWorx1,976 views
- 2:50
... and the clay turns to bronceby mypsychoticromance683 views
- 9:16
Midnight Club Custom Car (making of)by CoolCrakaKyle2,214 views
how do you make such detailed templates? What would a cheap/easy alternative be to make a detailed one?
have you ever combined casting plaster & sand in any way to make molds?
AdultoysUSA 2 years ago
The molds are designed in CorelDRAW then exported to AutoCAD .dxf format, depth and draft are added then it gets converted to a cut path and g-code is generated then the design gets cut on a CNC Router.
It's a lot of work...
Then it's even more work to sand it smooth, polish & powder coat it.
I use casting plaster (KerrLab Satin Cast 20) on lost wax applications.
jdsprince 2 years ago
Yes I have. You can make cores from plaster but they have to be dried in an oven for several hours to get the moisture out or it could explode when it comes in contact with the molten metal.
jdsprince 2 years ago
That's a difficult (for me) pattern! What is the white dust?
EmperorAst 2 years ago
It's called "Diamond Parting #104" (tm) parting dust. It prevents the sand from sticking to the mold. It just takes time and a lot of practice to get some serious detail but keep at it and don't get discouraged by the failures because each failure will teach you something new... -Hank
jdsprince 2 years ago