Magnets and HHO production with no external power supply..wmv
Uploader Comments (HHOPWR)
Top Comments
-
just as a suggestion try a neo magnet rod and coil it with magnetic wire in bifilar style it might step up the magnetic feild
All Comments (70)
-
James Clark Maxwell would say:"Well Yea Duh". No seriously, before he died he wrote that Faraday was wrong, magnetic flux was not static, but in constant spiral motion. [ fwiw, he also like others died young and suddenly].And that You serendipitously alligined & reinforced the line of flux. Who Knows, Could be.
-
Where's the magnets ?
-
You have brass bolts touching the nickel in a koh solution and that will produce a electric current. Any two dissimilar metals in an acid or caustic or salty solution will produce current.
-
put some dish soap in the water so the bubbles last for a while and build up. then light them
-
Interesting. Have you nailed down the process yet? Is it the meter providing the charge or another process? Unit acting as a capacitor?
-
Residual charge in the cell?
-
h2o + e = H H o this is what your cell did right? but
H H o = h2o + e the e is powering your outside plates.
when you stop your cell there is always some bubles left on the plate that are stuck, as they go into lower energy states, they bond back to water with the byproduct of electricity.
-
Orgon
-
the electricity that is making the bubbles comes from the plates on the hho cell, when disconected, they work as a capacitor, holding a voltage for a while until depleted.
-
the system of plates and electrolyte act like a condenser in electronics, I think ! LOL, I am not to clever with electronics at all, but thats what strikes me, and in essence it is a battery, which would still produce HHO Yes / No ?. LOL
Thom.
dissimilar metals inside an electrolytic solution will produce electricity Allesandro Volta experiments.
He used sulfuric acid as his electrolytic solution, his electrodes were Silver(brass set screw in your case) and Zinc plates. that is pretty much what is going on with your experiment.
hooking up your terminals to your cell closes the circuit.
* Hydrogen gas is released during the process as a byproduct. seems to me that you are doing the same thing but with a little difference.
coquivagabundo 1 year ago 3
@coquivagabundo Actually I raised the plates so only the nickel is in the water after the video. Not because of what you just quoted but because the cathode was getting electroplated with brass. The plates still continued to produce gas. This morning they were still producing gas. I think the main cell is acting like a battery and is holding some charge. The production is down to about half.
Larry
HHOPWR 1 year ago
@HHOPWR I have now unhooked the small device and have the cell shorted out. I will leave it for a day and see if there is anything there at all. I suspect it will be dead and this will stop. Interesting none the less.
Larry
HHOPWR 1 year ago
I think it was Fred something. Man your son scared me. It's after 11 here and mine are asleep. I though one of mine was screaming.
I hate being left out so I'm going to bust out my magnets again and build something.
This is crazy stuff Larry and must be a lot of fun.
delvis11 1 year ago
@delvis11 Yes Steve it is fun but still does not prove anything yet. Much more testing to be done.
Larry
HHOPWR 1 year ago