Funtana X50 Saito 82a

Funtana X50 Saito 82a APC 14x4W Servos Hitec 4x HS-635HB 1x HS-422 Reciver Hitec HPD-07RH QPCM Bat 4,8V/2500mAh Weight dry 2600 gram.
Skellefteå RadioFlygKlubb

Category:

Autos & Vehicles

Tags:

• Funtana
• X50
• Saito
• 82a
• Skellefteå
• RadioFlygKlubb

[dadoair08]

I translated wrong? wanted to say what propeller 14x4w or 13x8 for 3d?

[ThtY3]

Hello. I strongly recommend the APC 14x4! I have tried the APC 13x8 on the Saito 82 and Funtana, it suit the engine but not the model. The Funtana likes much thrust and less speed. Saito 82a APC 13x8 => 10.000 rpm APC 13x7 =>10.620 rpm APC 14x4W => 10.300 rpm Top Flite 14x6 =>9.300 rpm Temperature 4°C Air pressure 1015hPa Rapicon Fuel 60% Methanol 20%Syntetic oil 20% Nitrometan

[ThtY3]

I dont know but I guess not?

Maybe with a OS 55AX?

[popceed]

My 1st flight was today, and this model (with the Saito 82) seems to fall off with ALOT of right yaw at slow speed in the vertical...

Correcting it is obviously going to be a problem, and I didnt use thread lock on the landing gear, so it fell off.

But im going to re-epoxy the firewall tommorow since it balley/'d in.

I need an answer to this right hover?yaw, its sinister how hard this thing yaws in the vertical.

[dadoair08]

Thank you very much!I will follow your advice!!!soon as possible put the video of my Funtana.

[dadoair08]

Hello! I saw in some videos you used a propeller 14x4w and in others a 13x8 that I also have seen the same as your model I'm looking for a right propeller for 3D. Now I have a 14x6 but the engine has a few laps. between the propeller tips which I 14x4w and la13x8?

[GROFFO32]

do you think an os 46 ax will make this plane hover?