Now If i can figure out how to avoid the 10 MPH interface constraint I'd be good to go.
Use a straightened out staple inserted in the front which closes the clip that holds the pin in place. Just keep trying and moving it around to different positions in the hole. Also, holding it with a small pair of needle nose helps. Once you close the locking clip with the staple it pulls right out. There's a video on You Tube that shows how to do it.
hey sound man thank you for letting us know the position of the wire but there's an easier way to by pass it, just add a new wire into the hole and tie wrap it to the harness so it wont come out. so you dont wreck the plug and if you need warranty pioneer will never know you if the by pass it. have a good day.
@Brettstv i tried this on my 930 but it didnt help. the nav still takes over and stops me from operating, its been a pain in the ass
elmo1257 2 days ago
Nice. Thanks man
ChrisEP3si 1 month ago
which pins are for subwoofer?
sadzik65439 1 month ago
Great Video! Thanks a ton.
Now If i can figure out how to avoid the 10 MPH interface constraint I'd be good to go.
Use a straightened out staple inserted in the front which closes the clip that holds the pin in place. Just keep trying and moving it around to different positions in the hole. Also, holding it with a small pair of needle nose helps. Once you close the locking clip with the staple it pulls right out. There's a video on You Tube that shows how to do it.
thebluecats 6 months ago
lol 0:54 "lets see if he cuts his finger off...."
HatchetSwinginDrumma 8 months ago
hey sound man thank you for letting us know the position of the wire but there's an easier way to by pass it, just add a new wire into the hole and tie wrap it to the harness so it wont come out. so you dont wreck the plug and if you need warranty pioneer will never know you if the by pass it. have a good day.
viagraloro12 10 months ago
Im curious as to if this will work on the x9115bt??? i cant find a write up anywhere!!!! thanks...
1extremeking 10 months ago
@kerberos2006
im curious and have the same question, did you ever figure it out?
1extremeking 11 months ago
@MusicFan1959 Yes, it does.
Point4Dave 11 months ago
lol cant you just buy the pin removal tool from Fry's Electronics for $5 - 10 bucks, and do a professional job with the harness?
It will save 5:19 seconds of time
forevrbumpn 11 months ago