Glenn DeLaune - Boss GT-10 Tips & Tricks Tutorial

http://www.glenndelaune.com Here I demonstrate how to use the expression pedal to increase overdrive on the Boss GT-10. Please "Thumbs Up" and subscribe if you like.

Category:

Music

Tags:

• boss gt-10 tutorial

[VegasGuitarPlayer]

Hey there, Glen... Can you tell me if this effect can be done using the Preamp instead of the OD function? I've followed your instruction and works well if using the OD...but not for the Preamp. Thanks.

[extremevideopro]

@VegasGuitarPlayer Yes I think you can. Just go into the assigns and find the preamp gain control and assign a minimum and maximum amount to the pedal. It should work.

[musikeroz73]

hi glenn.can you please help me to solve this problem of mine.because when i assign fx in ctl 1 when i press the master/pedal fx then enter into assign when it opens it seems the master(off on)it always opens off unlike in your video when you open the assin your master below the screen it always opens on.so,can you please help me for this?thank you so much.

[extremevideopro]

@musikeroz73 You have to press the Master FX button to turn on an assign. Also when using CTL1 for an assign other than chorus(which is the default) you must first go into the pedal assign mode and turn CTL1 to off.

[rr8195]

Have you experienced this problem and if so, how do you resolve it? Thx!

[extremevideopro]

@rr8195 By using the EQ settings as I described to you. And also you can try the Resonator effect in wither FX1 or FX2. This also is sort of an overall EQ

[extremevideopro]

@mlunacantu Hey NOE, absolutely yes you can.

[mlunacantu]

''Glen'' Extremevideo,, As you showed us in this Video. That you can Assign the Expression Pedal, from clean to Overdrive. Can You Mix other effects on this Pedal, Like from Clean to Delay, like the ""Line6 Pod Hd 500"" Thanks Glen!!

[extremevideopro]

@rr8195 You can do that 2 ways. One is by using the EQ to notch out that very high end. two is the use the Global EQ settings in the System "Input" section. You have many EQ settings there.

[rr8195]

Glenn, I received my K4 and I'm having trouble keeping the harsh high end out of the the hi freq drivers. I was wondering if you cut the treble at the amp or perhaps eq everything with the GT and cut the 2k or so. I'm using a Luke Music Man with an active EMG 85 at the bridge and EMG single coils mid & neck. I'm staring to wonder whether active pups are not a good match with the GT.

Suggestions? THANKS!

[musiclives3]

@rr8195 i bought a k4 because of him too! lol