Making a Canon TX1 external battery module

I demonstrate how to construct a external battery module for the Canon TX1 camcorder. This module will allow you to power the camera with external batteries or a power supply and not have to remove the camera from your 3D rig or tripod.

Category:

Education

Tags:

• 3D
• canon TX1
• TX1
• tx1
• canon
• camcorder
• external power
• external power module
• remote power
• camcorder remote power
• NB-4L
• LION battery
• robert veach

[jeffgrave]

Hello Trailtraveler. Yes it is possible. You would remove the internal LIPO battery and connect a plug (like the one I used) to the internal connections. There is usually a small circuit board on the front of the battery box, where the external contacts are. Melt a hole in the battery box where it exits out your camera. Good luck.

[shane1800]

Very cool idea thanks for sharing it.

Would love to know what you connect this to, what battery and where to get it?

Thank you!

[jeffgrave]

Thanks shane1800. I connect it to a1C LIPO battery. I took apart a 3 cell 11.1V RC type LIPO battery. I removed the three cells to make three 3.8V LIPO battery's. I used JST connectors on the LIPO battery which then connects to the JST connector on the camera battery adapter. Hope that helps.

[jeffgrave]

I demonstrate how to construct a external battery module for the Canon TX1 camcorder. This module will allow you to power the camera with external batteries or a power supply and not have to remove the camera from your 3D rig or tripod.

[Trailtraveller]

I have a Canon mv 5i with a NB2L battery is this also possible ? Did you remove al the components on the board ?

[stevefoobar]

Excellent!