Linear Bearing Demo
Loading...
Loading...
1:33V Bearing Guide Wheels: Adjusting Eccentric Gui...by BishopWisecarver7,324 views
- 1:04Linear bearing xy reprap thingyby tigertalar7,613 views
- 0:46linear sliding 02by drRobutik28,337 views
- 0:09Magnets and bearing ballsby 0sufo0202,552 views
- 0:45Regenerative Shock Absorberby 12nit34819 views
- 0:23DSM Vertical Linear Accelerator for Vestibular...by DSMPiezo850 views
- 0:31Home Made CNC (ЧПУ)by MrEdi2787,990 views
- 0:37Linear Actuatorsby PBCLinear56,906 views
- 0:22Linear Combustion Engineby jasbcor13,966 views
- 0:53Rolamite 1by AutogenicMotor56,030 views
- 0:57Home made 10€ Linear guide for stepper motorby qettyz21,899 views
- 1:13Linear Bearings Are Bestby ARTCNC56,845 views
- 0:32DIY CNC x railby ultralajt40,505 views
- 10:22Making linear glides from drawer slidesby Matthiaswandel56,578 views
- 0:20Adjustable linear guidesby NGroomIGUS19,612 views
- 0:55free piston steam generatorby io948711,499 views
- 1:11Runescape Generator v1.4 (closer look )by thexboxemployee3,023 views
- 0:33Combined Bearingsby eurobearings27,988 views
- 0:33New CNC router, Z axis testby Walkifer5,996 views
Too much play in the bearing system. This amount of play may lead to bidding when a moment is applied or when used with a cantilever load. Normal bearing clearance is about .001" in linear applications. This video shows that the bearing system is actuall very sloppy on the bar stock.
ashworthent 3 years ago
Yes, this was intentional - the linear translation of the bar is only part of its intended function. there is also considerable torque applied at different moments during its linear movement, this causes binding when there is not enough clearance. In addition, there is far less friction applied to the shaft during 90% of its cycle- when it only rides on 1 or 2 of the 4 bearings. I will soon post a video of the device in which this bearing has been applied on my channell.
Sm0ky2 2 years ago