Narconon Warns of Methamphetamine Consequences
Top Comments
All Comments (24)
-
@ReligiousAtheiest Lol why'd you post that dog? What do you have to gain from teaching people how to make meth? I smell somethin funny. My guess is you told people how to make meth in a way that will blow them to bits, am I right? ;)
-
fucking sciontologie
-
i am 14 and just recent started highschool, and my frind had just recently started using in highschool >.>
-
Thats it. you now have clean and pure crystal meth. read from very bottom
-
we are going to do a second pull on the non-polar solvent. add a few
more drops of Hcl and shake it up again. test the ph again. looking for 7.2 again. once you
reach 7.2 again drain your meth/water into your clean visionware bowl (you should have
already scraped out the crystals from the last pull that you all ready evaporated. now
evaporate again. remember that if your not in a hurry, evaporating it with a hair dryer
will increase yeilds. Some chefs even do a third pull.
-
then test the ph of the ph of the water layer. you want it to test
at 7.2 or at least close to that. if it doesnt, add a few more drops of Hcl and shake the
hell out of it again and test again. after it is the proper ph, drain the water layer into
your visionware bowl and put it on the burner and boil down. you can finish with a hairdryer
if you want. now go back to your colemans fuel in the seperatory funnel and add a little
more distilled water.
-
Put the water layer in a jar and set aside. you can test for meth later. Keep the colemans
fuel/meth in the seperatory funnel. microwave a big glass of new distilled H2O till it is
hot. pour in one third the amount of water (compared to the colemans) and shake well. drain
the water out. repeat this 4 times. you are washing the NP Solvent. now once again, add one
third the amount of water to the sep. funnel and drop in a few drops of Hcl. (Muriatic Acid
Shake for a few minutes
-
drop a small drip
onto your litmus paper to test the Ph. (you will be testing the water/meth layer, NOT the
colemans fuel layer) you want the Ph to be 12. (yellow) if it is not a Ph of 12 then add a
little more lye and shake the hell out of it and test again. keep doing this till it test
out at 12. After it test at 12 drop in a tablespoon of table salt, and shake well. Now we
are going to seperate the layers in the funnel. We want to keep the NP Solvent (Colemans),
not the water/lye layer.
my friend is now suicidal
afeter 2 years of smoking/ snorting meth
akash2021 2 years ago 5
Meth destroys you, stay away from that Shit
Essy7887 2 years ago 5