Sweeping the Antenna to Tx (Transmit) port of a Decibel Products DB-4072
6-cavity duplexer.
The HP 8660C signal generator setup is:
Center Frequency = 445.100 MHz
Sweep width = 10 MHz
Step size = 100 kHz
RF Output = -20 dBm
Single Sweep, Slow
The HP 8591E spectrum analyzer setup:
Center Freq= 445.100 MHz
SPAN = 10 MHz
RF Ref Lvl = -20 dBm
CH A Max Hold
The duplexer was tuned to two frequencies 5 MHz apart
Duplexer tuning: RX Freq = 447.600
Duplexer tuning: TX Freq = 442.600
Notch depth measures over 75 dB on this port (greater than 75 dB attenuation of TX carrier at the RX frequency)
Sweep of Rx port see: http://www.youtube.com/watch?v=yc8-3f6VOQs
.
Link to this comment:
All Comments (1)