Sherline mill
Loading...
Loading...
2:41
7x14 lathe CNC kitby cncjedi62,639 views- 0:36
First run Sherline CNC latheby RockandIce833,268 views
- 0:48
First Sherline CNC Milled Pattern...by formwalt36,250 views
- 0:31
CNC Mill - how to break a toolby aloftindenver47,861 views
- 2:04
Sherline Lathe - Everyone does it so I did (Pencil Sharpener)by OfisProPlus7,867 views
- 0:42
What not to do with your CNC.by eleehcsleoj284,434 views
- 9:55
My Sherline Vid 1by Setharoo212,682 views
- 0:28
CNC Turning on the Sherline Millby microsteppingcnc80,718 views
- 3:19
2.3 Machine Tool Basics -- Mill Workholding -- SMITHY GRANITE 3-in-1by SmithyCo103,580 views
- 1:16
taig 4 axis cnc with NSK spindle for jewelry model makingby waxmodels39,248 views
- 7:49
Sherline CNC Gear Cutting Part5by Hobbynut124,141 views
- 1:44
X2 'Mini Machining Center' 4th Axis Grinding on hardened shafting.by Simpsons3624,017 views
- 0:59
whoops sherline millby spunkmtb5,971 views
- 0:48
How to Use a Fly Cutter with the Micro-Mark MicroLux Mini Milling Machineby micromarktools124,692 views
- 0:39
Sherline mill with resonance issues.by tgreening14,225 views
- 4:14
Sherline mill CNC machining radius Millingby rdgtm28,155 views
- 4:03
Sherline mill CNC machining Pocket Hole Millingby rdgtm8,779 views
- 0:56
Eliminating tool chatter on a Sherline latheby craiglibuse12,297 views
- 0:57
Sherline Milling Machine Feeding Latheby a3sigma6,931 views
My Sherline was a refit from a school shop class as well. I wish the Gecko drives were available back then, the Xylotex I'm using, like all of the other low-voltage controllers, can't match the Gecko's performance. Still, I get quite a bit of work out of my mill, ESPECIALLY since I switched from Mach3 to the Linux-based(and free) EMC a year ago.
vlmarshall 2 years ago
So nice, i want to fine the software to make may computer cnc.
Because i am a learning cnc, may jobe was with old leathe machine en old milling machine without cnc programiring.
Sarrdaar 3 years ago
This comment has received too many negative votes show
WAT DOES THAT DO?
MichaelMcInerney 3 years ago
Sherline is a cheap machine, that can be a plus or a minus depending on what you need from the machine. It might be good to learn on because I can't think of another that is cheaper and is still actually useful but don't expect a lot from it because it is small and not well suited for cutting steel. These machines seem to do alright in aluminum but they are slow. If you can afford one the Taig cnc mill is an accurate machine out of the box while most mills of this size (and price range) are not.
lb300 4 years ago
hey im interested in a small mill and lathe a cnc
im at school for machining and want to learn at home too
i want to make small engines
let me know whats best to get
nothing big
s172mch 4 years ago
Hi, I own a Sherline lathe and mill too. I bought mine from a school yard sale and have been working on restoring/retrofitting it. . . Looks like Mach3 in the back ground there for control software. What kind of driver board are you using and what CAM software do you run? I haven't gotten my machine 100% working yet but I should be able to start cutting some stuff next trip home from school. Keep up the good work, enjoy CNC and keep the vids coming. Peace!
haxforcandy 5 years ago 2
Hi, I own a Sherline lathe and mill too. I bought mine from a school yard sale and have been working on restoring/retrofitting it. . . Looks like Mach3 in the back ground there for control software. What kind of driver board are you using and what CAM software do you run? I haven't gotten my machine 100% working yet but I should be able to start cutting some stuff next trip home from school. Keep up the good work, enjoy CNC and keep the vids coming. Peace!
haxforcandy 5 years ago