ButtWeldJP.flv
Loading...
Uploader Comments (yoDatTV)
All Comments (9)
-
Dont be frightened to try something, just seen the end of ur vid, I could easily rip that apart, try an aluminium plate under (thick one) .if you check with HSE they will recomend barrier cream, then gloves. Also overalls and mask, I have worn gloves and masks for the last 7 or 8 years and my lead levels have come right down, I hate overalls though and just cant wear them :(
-
great video, thanks for sharing this
-
Gloves...always, a little tip.. try a size 3 nozzle instead of your size 2, and if you hold your gun at an angle the other way pointing into your work you will penetrate through the entire sheet, if it's too hot for you introduce a sideways or circular motion as well. Unfortunately you have just melted lead on top of it.
-
@sandwichshort2 you dont need gloves reali
-
No doubt at all you are a professional tradesman, but where are your gloves mister
-
thanks very much, very informative.
8:52
LeadLapWeldJP.flvby yoDatTV6,992 views- 4:02
Manufacturing a Lead Outlet Part Two @ Capital Roofing Co Ltdby CapitalRoofing5,982 views
- 0:48
Lead Burning (Welding) Gun Setup N.D.M Groupby NDMGroup6,521 views
- 1:41
Oxycetylene Welding - Hassles and Hints for Learners (Panel Beating)by TAFESouthAustralia8,799 views
- 2:00
NDM Group Lead Burning (Welding) Tutorial Video - "Floating"by NDMGroup2,497 views
- 1:14
Lead Free Body Solder Kit from Eastwoodby EastwoodCo12,105 views
- 5:59
Different Types of Weldingby weldingtipsandtricks370,514 views
- 2:15
Butt fusion welding - thin sheet mild steel (Panel Beating)by TAFESouthAustralia52,767 views
- 2:39
Mig Welding Technique Taught by Old Timerby weldingtipsandtricks1,159,183 views
- 13 videosinformative
- 1:10
The Butt Weld (Panel Beating)by TAFESouthAustralia3,872 views
- 1:42
Home Plus Demonstrationby TheWeldersWarehouse17,358 views
- 3:44
FitBasinWasteJPby yoDatTV3,480 views
- 0:23
lead sled Mercuryby 49erSacraKing9161,342 views
- 7:28
Step Chimney Flashing 2by justlead171,554 views
- 4:42
Lead dressing to code 8 bayby ollie51164lead1,615 views
- 3:06
Lead Manufacturing at Kronos Leadby ChillFactoryLtd1,602 views
- 6:25
How to stick welding (SMAW): Vertical Tee jointby xivietal666headx43,707 views
- 2:23
how to oxy acetylene weldby freddytk42167,372 views
- 5:21
Lead Step flashing Formed On The Roof.by 07royski16,299 views
no penetration
80ghog 9 months ago
@80ghog Hi Olli if you put on barrier cream when working with lead then you do not need to wear gloves! This gives you more feeling when working without gloves! A number two nozzle is quite adequate for welding code 4 lead. If you watch the video all the way through you will see right at the end I show the back of the weld to show the root penetration! Thank you for your interest.
yoDatTV 7 months ago