2.4 wireless camera
Loading...
Link to this comment:
Uploader Comments (coveycc)
All Comments (12)
-
You sould not cut the power cable because most of them they have a regulator on the connector so that the camera will receive 5VDC and the txmitter will receive 8 to 9VDC. If you cut the power then you have to get a voltahe regulator for 5VDC for the cam and 9VDC for the txmitter. Unless the camera have a builtin regulator then you need not use the regulator else the camea will damage
-
it will void the warrenty of ur camera units , so no don't do it
-
i think that that camera that you saw may have come like that because i was looking for some on amazon the other day and i found some without all those wires
-
if you do this really the only ones i think you can cut the av cables but if you cut it where you where pointing you could get the electrical ones confused because there are four wires that will be similair to each other once you get in there so it probably best to keep it how it is just in case you ever have problems with the transmitter
-
you should consider cutting them because they make them like that just in case the transmitter ever goes out so you can use it as a wired camera
-
well you could cut the ones that go from the transmitter from the camera and join them but you cannot cut the main power cord(the one that plugs into an ac adapter to the transmitter) but i could ruin it because sometimes when you put wires back together they dont work so you should think about doing this
3:09How to make any CCTV Camera Wireless with Wirel...by dvrmaster80,878 views
- 1:10wireless security camera setupby awaychung152,658 views
- 1:48WIRELESS VIDEO RECEIVER AND TRANSMITTER 2 4 GHz...by velemirs11,655 views
- 1:33Indoor RC Helicopter Flight Onboard-Camera Spy Camby cvlv64173,902 views
- 0:48Surveillance Equipment Demonstration: Wireless...by SpyOpsNet11,048 views
- 4:14Teardown of wireless Astak pan Tilt cameraby cedricpod4,880 views
- 1:14Mammoth Spy Night Vision USB Cam and Micby CL3Marketing4,189 views
- 0:28radio controlled pan, tilt, zoom wireless camer...by chrisgladwin32,736 views
- 6:082.4G Wireless Micro Camera Reviewby TacoTormentor10,053 views
- 5:47fuel cell - R.C. car with wireless camera power...by Mjaeger7232,068 views
- 1:49PRO-Q to introduce its IP network camera adopti...by avingusa1,640 views
- 0:45Wireless Control Pan Tilt Camera in ACTIONby joeasdf121,272 views
- 0:40micro câmera color oculta sem fioby grupopadrao49,085 views
- 0:31Spy Shopby MJElectronics24,674 views
- 8:46BTL Industries 2.4GHz Wireless Camera Reviewby BurTechLaunchers887 views
- 7:02Wireless Cameraby lockergnome12,044 views
- 3:44Micro Câmera sem Fioby ddeencontrar8,649 views
- 2:54How to make a pan tilt unit for your cameraby cedricpod143,371 views
- 3:18Versa Cam Wireless Security Cameraby MJElectronics1,947 views
- 2:21wireless camera 1.2Ghz 200mw TESTby enlipo3,415 views
Mikey, I didn't pay that much for it so I'm not worried about the warrenty. Weight is my concern. Several guys on the forem have done it, I just need to know exactly what to do so I don't ruin it. Thanks!
coveycc 5 years ago
I am going to put it on an RC airplane and there is too much weight. I'm almost sure I've seen other guys do this in some sort of way, but until I bought this I never paid attention. BTW! Thanks for all your input.
coveycc 5 years ago
well you could cut the ones that go from the transmitter from the camera and join them but you cannot cut the main power cord(the one that plugs into an ac adapter to the transmitter) but i could ruin it because sometimes when you put wires back together they dont work so you should think about doing this
panchogordo1 5 years ago
Thanks again!
coveycc 5 years ago
i think you could do it but you would have to keep the main power cable(the one that goes to the transmitter)
panchogordo1 5 years ago
Thanks guy! Do you mean that I should put both my red wires (power) together as a power source to both the camera and the little tx?
coveycc 5 years ago