DM7 NEEDS YOUR HELP WHATS WRONG??!

Sorry guys im gonna be sending this to dye because i need the neck rethreaded anyways so i wont be able to help any one who has this same problem

Category:

Sports

Tags:

• DM7
• DYE
• Matrix
• Paintball
• Speedball
• problem
• leak
• your
• mother

[sparktite]

sorry to be offensive but im not the usual dumb paintball kid who goes... OH NO IVE GOT A LEAK! and he hasnt even tried replacing a single o ring yet. Thats after i rebuilt every o ring on the bolt, and i tried lubing normally over lubing and under lubing. Im probably just gonna be lazy and send it to dye and hope they fix it for me. But if i could figure out what exactly it is, id fix it myself.

[Sk8on4ever]

It could be the Oring in the can and the LPR could be overpressuring it, Dye usually leak when the LPR is too high. Not being condescending but i had a similiar problem with my DM4 and what happened was a oring in the LPR was bad and would cause the LPR to jump various pressures and knock out the oring in the can.

[sparktite]

Cool thanks for the info, lifes been real busy at home so not much time for paintball, but ill deff try messing with the lpr in hopes i can fix this. But im still gonna need to send it to dye to get the feedneck rethreaded, thanks again 8)

[sparktite]

No one has helped me figure this out so far, idk whats wrong with it. I ran out of air. Im gonna send it to dye to rethread the feedneck. Idk if my warranty will cover what ever is wrong with it. But i was hoping some one could point me in a direction of where i could start looking to solve this problem.

[darkpaint77]

mgiht have poped a macroline inside idk

[Soccer4sport]

Take out the bolt, relube all the o-rings. Check your LPR and check your dwell. may help. fixed mine.

[cliffedgeking]

change the orings on the bolt, message me if it doesnt work

[aus10fek]

mine is doing the same exact thing did you ever figure out what was wrong with it