Detailing a 1972 Ferrari - Part 4 Cut and Polish

Cut and polish with Tom as he details a 1972 Ferrari with one single product, Ceram-X Polish.

http://www.clearcoatsolutions.com
http://www.superiorpolish.com

Category:

Autos & Vehicles

Tags:

• auto detailing
• wax
• polish
• cut n polish
• ceram-x polish

[Straightsix76]

Is cutting with a wool pad really necessary? I've had good results by cutting with a fast cut compound and medium cut foam pad after using 3000 grit on a DA sander

[ClearcoatSolutions]

@Straightsix76 Yes, because the wool pad is the most effective way to take out deep sand scratches without heating up the surface as much as a foam pad would.

[Straightsix76]

@ClearcoatSolutions the wool pad may take out deep sanding scratches but it will leave deep swirls, no?

[ClearcoatSolutions]

@Straightsix76 not with CSI Ceram-X Polish because it's a non-diminishing abrasive.

[djspock5150]

Great Video's, however what speed for the foam pad same or different>? Please make a video 5 with what wax and speed to complete the job. Best video I have seen on Color Sanding Kudos!

[ClearcoatSolutions]

@djspock5150 Sorry for the late response. You should use the same speed for the foam pad (1500), but go down gradually to about 1000 as you are nearing the end of your buff. Please check out our channel to watch our new CSI Q-7 Wax video. Thanks for watching the videos.

[motionman0]

Hey, you are the System One guy. Did the System One line morph into the CSI product? I did like the System one stuff. Thanks! Perhaps you can do your next video using a black car.

[Vycatocom]

@SP330Y Yes, I noticed too.

[zackomackwrestler]

@SP330Y I know wtf was the point of buffing orange peel lol

[ShowtimeDetailers]

ill stick with my rotary and wool pads for cutting as well. At least until they come up with an orbital system that doesnt take a week to get the same results you can get with a rotary in 5-6 hours......that paint is single stage right?

[SP330Y]

Holy orange peel!!!

[Bsktballplyr16]

nice holograms!