Rb30 s14 Holset hy35

Had to notch the hood in the end, it looks ok

Category:

Autos & Vehicles

Tags:

• Holset
• Turbo
• Rb30
• Rb25
• Rb26
• Bigphil
• Nissan
• Datsun
• Skyline
• S14
• S13

[turbo280z]

The dash is a 240sx so I think that's the ka redline?? Idk?

[turbo280z]

I also have been thinking my l28et spooled this Holset up faster than the 3.0 rb. I FOUND A REASON (mist likely?)

I spot welded the internal waste gate, yesterday the car wouldn't hardly at all. Felt like intercooler pipe came undone? The wastegate was flopping open under revving so the weld had come loose. I need to take the down pipe off and reach in there and weld it up again, much better.

I hope/think it was leaking on the test drive?

[steffentangen91]

Ey man, one nice ride dang :P i have a friend that im trying to convice to get a RB 26 motor+gearbox.. is it hard to put them in a 14? :P his car is all stock, but now that i have tuned my S4 he wants to beat me again.. :P im maby gettin a hy 35 to my s4 :D easily 400hp then ^^

[jmaori]

dude why are u happy with ur rb30 boosting at 5000rpm, thts rubbish last rb30 i built it was on 14psi by 3500rpm

[jmaori]

@stagefumer11 they have after market harmonics balancer dude only way to get a rb30 block over 7000rpm

[Codenamepenis]

That looks like a he351cw or 41 not a hy35 although almost simaliar in size. Nice rb to I have a 25 neo. I'm getting a holset for it soon great turbos. And pull that damn silencer off if you want that thing to whistle.

[RvolvoR]

pull the silencer ring off the inlet of the turbo, it will whistle even louder...

[cobratoxic]

@AyeItsMike Anyway I think the RB30 rotation should be more so because it's almost like a V8 or a diesel car

[Suprakidd1]

@turbo280z did sound like u had a exhaust leak either soo it could be the wastegate.. sounds like a good start to me phil lol, id think it would spool the hy35 buy 3200rpm at least..

[factoryman1988]

yeah that thing should be revving a lot higher

[stagefumer11]

R.I.P.S Stock built rb30's have a 8000 rpm redline. These builds are stock internals, standard spec ACL bearings etc. Nothing special. They havnt had 1 failure.