Changing Graphic on a Banner Stand

This short vidoe shows how to swap-over the printed graphic panel on a roller banner stand. The print must be unwound from the mechanism and a locking pin inserted into the cassette. Once the mechanism of the roller banner stand is locked in it's outware position, it can be removed and swapped-over.

This particular roller banner stand uses a velcro linage to attach the graphic to the base. Some stands use a self-adhesive linkage but the principle of changeover is the same. http://www.printdesigns.com

Category:

Education

Tags:

• changing
• graphic
• banner
• stand
• stands
• roller
• roll
• up exhibition
• display
• displays
• exhibit

[PrintdesignsLtd]

Ideally you should you a very strong double sided tape. We use a product called TESSA tape which has a very aggressive adhesive tack. Also when the new print has been fastened onto the base, it is a good idea to place an extra piece of parcel tape over the join between the print and the stand for extra security. Kind regards, Printdesigns

[DoAPooAtPauls]

Thanks for the vid, really handy to see how easy it is.

Is the glue sticky enough to be re-used or should more be applied, any idea what glue should be used ?